Dear Taka, Thank you for the information! For the active converter from DP to DVI, is it something like StarTech.com DisplayPort to DVI Active Adapter ( https://www.amazon.com/StarTech-com-DP2DVIS-DisplayPort-Active-Adapter/dp/B004SUO1GM) ?
On Mon, Jan 30, 2017 at 4:25 PM, <fukami...@chugai-pharm.co.jp> wrote: > Dear Xiao, > > > > You need an active converter from DP to DVI. You can't get 120Hz if you > use a passive converter, even with a DVI dual link cable. If you used an > adapter come with the board, it's probably passive. > > > > Taka > > > > > > *From:* CCP4 bulletin board [mailto:CCP4BB@JISCMAIL.AC.UK] *On Behalf Of *Xiao > Lei > *Sent:* Tuesday, January 31, 2017 9:10 AM > *To:* CCP4BB@JISCMAIL.AC.UK > *Subject:* [ccp4bb] Coot and Pymol 3D in Quadro M4000 Graphics Card under > Windows 10 > > > > Dear All, > > > > I tried to make Coot and Pymol 3D working for a HP Workstation with Quadro > M4000 graphics card, the card has four displayport. I also has a Asus 24 > inch 3D monitor. I tried to connect the graphics card with the monitor > through displayport to displayport connection and displayport to DVI-D dual > link connection but failed to set the monitor run on 120Hz. It seems I have > to follow the old way of using DVI-D dual link connection for both graphic > card and monitor, but the problem is that the graphics card does not have a > DVI-D dual link socket, it only have displayport. > > > > I appreciate any suggestions. > > > > >