I know that this an old thread, but I had another VT100 with broken power switch and so I dug up what I used to buy.
This has quick connect tabs so it is needs no modifications to fit. It has a metal handle and feels quite sturdy. https://www.mouser.se/search/ProductDetail.aspx?R=0virtualkey0virtualkeyST242D00 2017-08-29 22:25 GMT+02:00 E. Groenenberg via cctalk <cctalk@classiccmp.org> : > > Thanks for the info. > I'm in the Netherlands, so no Home Depot branch here, but now I have seen > the picture of the replacement I can look locally or check with > digikey/farnell to see what they have in their catalog of switches. > > Regards, > > Ed > -- > Ik email, dus ik besta. > > > On Tue, August 29, 2017 21:47, Santo Nucifora via cctalk wrote: > > I've replied to this and helped someone else out before as it seems to be > > a > > frequent question. > > > > I've replaced two VT-100 switches with chrome "bat" handle switches from > > Home Depot in Canada shown here: > > https://www.homedepot.ca/en/home/p.t...000104171.html > > <https://www.homedepot.ca/en/home/p.toggle-dpst-20a-125vac- > of-1cd.1000104171.html> > > The one at the USA Home Depot is here: > > https://www.homedepot.com/p/Gardner-Bender-20-Amp-Double- > Pole-Toggle-Switch-1-Pack-GSW-14/100149490 > > > > I had to remove the screws and filed the terminals down a little because > > the terminals were a little wider than the original connectors but it > > works > > like a charm and will not break. It is almost a direct replacement > (except > > for the terminals needing some filing). > > > > You can probably pick one up on the way home if you are in North America. > > > > Hope this helps. > > Santo > > > > On Tue, Aug 29, 2017 at 3:38 PM, John Wilson via cctalk < > > cctalk@classiccmp.org> wrote: > > > >> On Tue, Aug 29, 2017 at 09:04:11PM +0200, E. Groenenberg via cctalk > >> wrote: > >> >Does somebody maybe have a spare switch of a VT-100 (the one at the > >> back)? > >> > >> If you get stuck, there's a switch that's made as a replacement part for > >> Fender guitar amps which, apart from having a metal handle instead of > >> plastic, is a very close match to the VT100 power switch. Really it's > >> what DEC *should* have used ... > >> > >> John Wilson > >> D Bit > >> > > > >