Ok. Those are quite small. So you have one? Or those are not yours? If you have one, and a way to accurately measure it, making more will be easy for anyone with a lathe. I could do it, but surely you can find a machinist closer to home?
Guy At 01:03 PM 10/11/2018 +0000, Riesen Thomas wrote: >Guy, >I am looking for small motor pulley ... see pic ... >Regards >Thomas > >-----Ursprüngliche Nachricht----- >Von: Guy Dunphy [mailto:gu...@optusnet.com.au] >Gesendet: Samstag, 10. November 2018 13:25 >An: Riesen Thomas <thomas.rie...@predata.ch>; General Discussion: On-Topic and >Off-Topic Posts <cctalk@classiccmp.org> >Betreff: Re: 50Hz Pulley for 8" Floppy Drive Mitshubishi M2894-63B > >At 12:03 PM 10/11/2018 +0000, you wrote: >>Hi all >> >>Any suggestions where to find two 50Hz-Pulleys for the 8" Floppy drive >>Mitsubishi M2894-63B? >> >>If there also the appropriate ribbon gummies available, I would be very >>happy. >> >>Regards >>Thomas > > >Do you know what they look like, and the dimensions? >Because I have these. http://everist.org/pics/misc/IMG_1655_pulley_800.jpg > >_Maybe_ they were off Mitsubishi drives, not sure. Had them in a box of floppy >drive related bits for a loooong time, and have no recollection of where they >came from. >These are 49.0 mm OD, hole 4.7 mm dia. And this is Australia, with 50Hz mains. > >Guy > > >Attachment Converted: "f:\email\attach\Pully_8Zoll_02.jpg" > >Attachment Converted: "f:\email\attach\Pully_8Zoll_01.jpg" >