Hi Bill, On Wed, Dec 04, 2019 at 01:06:39AM +0000, Bill Gunshannon via cctalk wrote: > On 12/3/19 7:51 PM, Craig Ruff via cctech wrote: > > Just in case someone else hasn't already responded, the P112 does not use > > DOS style fdisk partitioning for a hard disk. It is done in the BIOS image, > > and then the logical disks have to be initialized. This is described in the > > "P112 GIDE Construction.pdf" document. > > > > I've only used 3.5" floppies, which work fine. You can also attach a PATA > > CD-ROM drive and access disks with a program that escapes my memory at the > > moment. > > > > Along this line I have solved one problem. I mentioned INIT in > RSX180 printing gibberish on the screen when trying to init a > hard disk partition where it had worked on a floppy. Problem > was the size of the partitions. I had tried just making one > partition for the test I learned that FDISK will make partitions > too big for any of the P112 OSes. I now have a hard disk with > 5 partitions to play with. On to the next problem. > > bill
I have a pair of P112 systems, both with GIDE interfaces, booting CP/M from CF cards successfully. I have not done anything with RSX180 though. I have been meaning to try and get one reading/writing 8", ideally 3270 format, CP/M floppies, but have not gotten around to working on this yet, and have no idea how easy or difficult that might be. When I put these together and was getting them working initially, Terry Gulczynski was very helpful. See his site at http://www.stack180.com/ You may want to get the latest P112 ROM image and corresponding CF card image from his site. Mark -- Mark G. Thomas <m...@misty.com>, KC3DRE