On 5/21/2021 3:41 PM, Zane Healy via cctalk wrote:
Does anyone have experience using a SCSI2SD board to replace a Hard Drive on a
VAXstation or an AlphaStation? I’m thinking about using them on some of my
systems to reduce the amount of noise. I’ve gotten used to a quiet office. :-)
Zane
I've got a SCSI2SD V5 in my MicroVAX 3100 M95. It sits on the SCSI bus along
with the CDrom drive and a couple of 18GB Compaq/Seagate drives. I've also got
a SCSI2SD V6 in each of my two AlphaSever DS10 systems. I had a few issues
with the MV and an earlier version of the V5 firmware, but the last few
versions have been no trouble at all.
In the MV3100 I mounted the SCSI2SD on a 3.5" 3-D printed mount which is mounted on a
3.5" to 5.25" mount and it's mounted in the front opening next to the CDROM drive.
In the DS10's the 3.5" 3-D printed mount is put in the floppy opening.
--
John H. Reinhardt
PRRT&HS #8909
C&O HS #11530
N-Trak #7566
