> <heal...@avanthar.com> wrote:
In this the weakest link would appear to be the SD Card. As such it seems to me that the best solution would be to have 2 or more SCSI2SD?s in the device. I?m not sure what benefit would be achieved by using a single board to present multiple devices. Unless of course you had a drive size limitation, or you?re trying to emulate something like 2GB or 4GB drives. As an example, that would be handy for VAXen with a 1GB Boot Drive limitation. -Zane Zane, I am using SCSI2SD cards in a VAXstation 4000/90a, and in a MV3100-80 as well as an Alpha DS10. In the two VAXes, I use two SCSI2SD cards, configured identically with a system drive and a user drive on class 10 16GB microSD cards. So each microSD card has both the system drive and the user drive. Thus I can use VMS backup from one microSD card to another so that if one microSD card fails I can easily recover from it. So far I have not had hardware failures, but being able to recover from a bad software installation which has been VERY helpful. Mark
