Did you build SIMH with the latest fixes? Within the past few weeks I merged a fix to the RQ device emulation. The previous code would mishandle a detach followed by attach on what was supposed to be a device supporting removable media, and that error message sounds familiar.
paul > On Aug 4, 2023, at 12:33 PM, Hans-Ulrich Hölscher via cctalk > <cctalk@classiccmp.org> wrote: > > I did some testing on the image sets using simh. > I had to prepare the images first using lbn2rx50 > <http://www.chdickman.com/pdp11/>, because simh expects them to be in > logical order. > Results: > ULTRIX-11 V3.0: All images good > MicroRSTS V2.1: The third image throws an error: > > > > > > > > > > > *sim> ATT RQ2 RSTS21-3.RX5%SIM-INFO: RQ2: 'RSTS21-3.RX5' Contains a RSTS > File system%SIM-INFO: RQ2: Pack ID: MICR3 Revision Level: 1.2 Pack > Clustersize: 1%SIM-INFO: RQ2: Last Unallocated Sector In File System: > 799sim> c?Error opening Backup set?Device hung or write lockedMount volume > 3 on device _DU2:Press RETURN when ready:* > > MicroRSX V2.1: Have not found out yet which one of the images is the one to > start with. Is the image set complete? > I thought that RSX4-I.IMG <https://www.crystel.com/pdp/os/RSX4-I.IMG> was > the one (with an I instead of a 1), but all I got was: > *Trap stack push abort, PC: 000014 (000040)* > Maybe that image is bad, too ... > > Ulli > > Am Do., 27. Juli 2023 um 00:55 Uhr schrieb Chris Zach via cctalk < > cctalk@classiccmp.org>: > >> Ok, files are up on https://www.crystel.com/pdp/os and >> https://www.crystel.com/pro350 >> >> MicroRSX, Ultrix11, MicroRSTS/E, and um spss >> >> On 7/26/2023 1:51 PM, Mark Matlock via cctalk wrote: >>> Chris, >>> I would be interested in getting a copy of the SSPS/X software for >> POS. I have a manual for SPSS/11 and would love to try to get the software >> running under RSX11M+ if possible. >>> >>> Thanks, >>> Mark >>> >>>> On Jul 26, 2023, at 12:00 PM, cctalk-requ...@classiccmp.org wrote: >>>> >>>> From: Chris Zach <c...@alembic.crystel.com <mailto:c...@alembic.crystel.com >>>> >>>> Subject: [cctalk] Old Professional/350 software, any of this out there >>>> Date: July 26, 2023 at 9:30:10 AM CDT >>>> To: CCTalk mailing list <cctalk@classiccmp.org <mailto: >> cctalk@classiccmp.org>> >>>> Reply-To: "General Discussion: On-Topic and Off-Topic Posts" < >> cctalk@classiccmp.org <mailto:cctalk@classiccmp.org>> >>>> >>>> >>>> Starting to go through my boxes of POS stuff. I know of course that 3.2 >> is out there (minus the Pro/Communications option which has a bad disk in >> the distro) however are these disks out there now? >>>> >>>> Pro/Venix 1.0 on floppies >>>> POS V2.0a on floppies >>>> >>>> POS version 1.5 (with test diskette, maintenance application, a thing >> called Pro/Pre labelled "Diskette system", system overview and instruction >> disks) >>>> >>>> POS V1.7 (I have that here somewhere) >>>> >>>> Pro/Basic Version 1.0 and 1.2 >>>> >>>> SPSS/X For Professional (this is a really interesting one, anyone heard >> of this?) >>>> >>>> If so let me know and I won't copy them. If not I'll go over to the >> mighty Deskpro/XE and start sucking the data off for archives.... >>>> >>>> Thanks! >>>> Chris >>>> (Hoping to find old drivers or scaffolding or something that will give >> me a hint into how DEC ported POS) >>