Maurice Wilkes - by chance any relation to Mary Allen Wikes (of LINC-8 fame) ?
On Sun, May 4, 2025 at 5:08 PM Will Cooke via cctalk <[email protected]> wrote: > From all I have seen, Maurice Wilkes is considered the inventor of > "microcode" as we know it. In the linked paper from 1951 he uses the term > "micro-programme", so I think it is safe to say microcode was used in the > same way in the 70s as it is today, although surely some people used it for > normal machine code. I have seen examples of that, although none come > immediately to mind. > https://www.cs.princeton.edu/courses/archive/fall09/cos375/BestWay.pdf > > Will > > > > On 05/04/2025 4:05 PM EDT Steve Lewis via cctalk <[email protected]> > wrote: > > > > > > The IBM5100 also uses the term "microcode" - but I'm not sure if that > term > > pre-1975 means the same as what, say, Intel used it for around the x86? > > I've seen a glimpse into the syntax of the x86 microcode. In the IBM > > 5100's case, its CPU is distributed across 14 or so SLT chips - so I > never > > fully understood how it implements its PALM instruction set. I know > the > > two large IC on that process are two 64-byte memory things (dunno if > > categorized as SRAM or DRAM, or neither), mapped to the first 128 bytes > of > > system RAM (so a high speed pass through, where that 128 bytes correspond > > to the registers used by each of the 4 interrupt levels). That PALM > > processor was developed right around the time of the Intel 4004 (late > '71 / > > mid '72), and stout enough to run a version of APL about a year later (I > > see Intel made a version of FORTRAN for the 8008, or at least a claim for > > it in the Intertec brochures). > > > > Anyway, all I mean is, in early 70s did "microcode" just mean > > instruction-set, and that changed a few years later? Or did microcode > > always mean some kind of "more primitive sequence" used to construct into > > an instruction set? > > > > -Steve > > > > > > > > On Sun, May 4, 2025 at 1:33 PM ben via cctalk <[email protected]> > wrote: > > > > > On 2025-05-04 2:11 a.m., jos via cctalk wrote: > > > >> I recall that system had many boards, the whole "CPU" box was > external > > > to > > > >> the monitor (and in the earliest versions, the power supply was > also a > > > >> large external box). I can't really fathom creating a BASIC out > of raw > > > >> TTL, or maybe I'm misunderstanding the approach. > > > > You build a processor with some TTL, and then implement a BASIC on > that > > > > microprocessor. > > > > There is always this intermediate step, no machine executes BASIC > > > > directly in TTL. > > > > > > > Well for BASIC that is true. > > > The Fairchild Symbol Computer was test to just how far TTL could go. > > > > > > > Look here for an example of a processor (Datapoint 2200) in TTL : > > > > > > > > > > > > https://bitsavers.org/pdf/datapoint/2200/jdreesen_shematics/DP2200_mb.pdf > > > > > > > > Jos > > > Micocoded coded machines, could likely be programed to run basic. > > > > > > Ben. > > > > > > > > You just can't beat the person who never gives up. > Babe Ruth >
