> On Jul 5, 2025, at 10:14 PM, Gavin Scott via cctalk <[email protected]> 
> wrote:
> 
> On Sat, Jul 5, 2025 at 2:40 PM Paul Koning via cctalk
> <[email protected]> wrote:
>> I assume those were all done by hand; it's not obvious how a robot could do 
>> that in the early 1960s, unlike wire wrap backplanes.
> 
> Nice page on the hand-assembly of early Cray systems with cool pictures:
> 
> https://cray-history.net/2022/08/28/sonjas-story-about-cray-1-fabrication-and-assembly/

Wow, very nice!

The CDC 6000 backplanes look quite similar but they are much bigger.  
https://upload.wikimedia.org/wikipedia/commons/c/c4/CDC_6600.jc.jpg

Speaking of core memory: conventional RAM is easy to wire (with steady hands) 
because the cores can be set in a holding jig and the wires then are threaded 
straight through.  But there are core ROMs, and in those the data patterns are 
defined by wires that either go through or skip around a given core.  And you 
have a whole bunch of wires (32 or more) per core.  So you end up with a row of 
cores and a big bundle of wires randomly zigzagging in and out of the cores.  
The name "core rope memory" came from what that looks like.

Occasionally such ROMs use cores that are merely transformer cores, for example 
in an early Wang calculator.  But the earlier designs used memory type cores, 
essentially acting as logic elements.  That is the case both for the best known 
example, the Apollo spacecraft on board computer, and for the Dutch 
Electrologica X-1 (which uses a different structure with faster data access 
timing).

In fact, conventional RAM core memory also uses the cores as logic elements, 
they are not simply bit storage devices.  The point is that each core 
essentially performs an AND operation on the wire current of the wires running 
through it, with the read operation defined as Xsel and Ysel, and the write as 
Xsel and Ysel and not Inhibit.  The magnetic properties of the cores make this 
possible.  Some early logic circuits were magnetic ones, built out of memory 
cores.  I remember a device documented in the ham radio magazine QST (mid 
1960s) that used magnetic core shift register.  And Ken Olsen (founder of DEC) 
got his MS from MIT via a thesis on magnetic core logic devices.  (Oh yes, and 
his name appears as contributor to the Apollo computer ROM design.)

        paul

Reply via email to