Just to tie a knot on this.... The MV 3100 is working great. I did replace the RZ25 drive with a ZuluSCSI and have it emulating a couple of RZ25s. I have VMS 5.3-1 up and running. I used the licenses from the OS that was running on it. I also have it on my DECnet network with my PDPs. The PSU looks great and the battery is not a problem either. The CDROM drive I got works great in an old Sun 411 enclosure attached to SCSI-B. I haven't used the TZ30 tape drive yet. I am going to see if I can treat the tapes I have to some time in the dryer and see if that helps. I think the surface of the tapes has softened and is leaving residue on the r/w head. I have read of some folks having success with the dryer. We shall see. But for now I am quite happy with it. Thank you everyone for all help and advice!
- Peter On Mon, Dec 1, 2025 at 10:30 AM emanuel stiebler <[email protected]> wrote: > On 2025-11-30 14:53, Peter Ekstrom via cctalk wrote: > > Very interesting thread. I was kinda thinking too that someone running > VMS > > on a machine for hobby use would be too small of a potato to go after. > > Incidentally, what would y'all value a MicroVAX 3100 at? I am looking at > > one on eBay for $550 but am considering making a lower offer. > > Which 3100? > There are some very low performance 3100 at the lower end, and the > best(?) 3100/105 or 3100/95 still fetch some serious money. > > My recommendation is usually the pizza box 4000/vlc ... > Specially, if you don't know what you need it for :) > >
