Hi Jorg,
I will try DAO tonight once I get home. :-)
Btw, since I am not in front of my linux, I can't read the manpages for
cdrecord.
My question is, is DAO good for cd to cd copy of AUDIO or ripped WAVs?
Thank you very much.
> -----Original Message-----
> From: Joerg Schilling [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, July 05, 2001 3:47 PM
> To: [EMAIL PROTECTED]; Ronneil Camara
> Subject: RE: cdrecord audio cd burning problem
>
>
> >From: Ronneil Camara <[EMAIL PROTECTED]>
>
> >Ok, what should I do now?
>
> >Btw, what can you say about Yamaha CRW2100EZ cd writer?
>
> >> -----Original Message-----
> >> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
> >> Sent: Thursday, July 05, 2001 1:24 PM
> >> To: [EMAIL PROTECTED]; Ronneil Camara;
> [EMAIL PROTECTED]
> >> Subject: RE: cdrecord audio cd burning problem
> >>=20
> >>=20
> >> >From [EMAIL PROTECTED] Thu Jul 5 20:09:26 2001
> >>=20
> >> >I don't have problems with burning data to cds. My problem=20
> >> is burning =3D
> >> >audio.
> >> >I'm running Redhat 6.1, 2.2.19 kernel and LG CED 8120B CD=20
> >> writer. My CD =3D
> >> >is
> >> >at 0,0,0.
> >> >First that I use was 1.10 then I upgraded to 1.11a05
> something. But =
> >=3D
> >> >still,
> >> >same errors.
> >> >Sense Key: 0x5 Illegal Request, Segment 0
> >> >Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
> >> >Sense flags: Blk 0 (not valid)=3D20
> >> >cmd finished after 0.009s timeout 40s
> >> >Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
> >> >cdrecord: Input/output error. close track/session: scsi
> sendcmd: no =
> >=3D
> >>=20
> >> These drives seem to have firmware bugs and only support DAO audio.
>
> Read the man page and use the DAO mode of cdrecord.
>
> Jörg
>
> EMail:[EMAIL PROTECTED] (home) Jörg
> Schilling D-13353 Berlin
> [EMAIL PROTECTED] (uni) If you don't
> have iso-8859-1
> [EMAIL PROTECTED] (work) chars I am J"org
> Schilling
> URL: http://www.fokus.gmd.de/usr/schilling
> ftp://ftp.fokus.gmd.de/pub/unix
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]