Has anyone ever connected
Freecom Traveller II CD RW CMCIA drive (www.freecom.com)
to a Linux box successfully?
I have a Dell Inspiron 7500 Laptop 700 MHz Pentium III 128MB.
My CD RW drive works under Windows 98 SE, however I cannot
get the drive to work under SuSE Linux 7.1.
I installed `append="hde=ide-scsi"' under lilo.conf
I recompiled the kernel with PCMCIA SCSI make modules of tape,
cdrom, disk configuration settings.
I had a look at the http://seismo.ethz.ch/linux/xcdroast.html
and tried all the ideas in this document.
I search on google.com "freecom cd rw linux" came up with
nothing special, except that CD Writer is mushitushi driver
and what ever that means, and it needs to be booted from DOS
to work.
Any one know and anything special?
Here is my dmesg output:
==========================
Linux version 2.4.7 (root@xenonsoft2) (gcc version 2.95.2 19991024
(release)) #5 Sat Sep 8 03:42:17 BST 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ea000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007ff0000 (usable)
BIOS-e820: 0000000007ff0000 - 0000000007fffc00 (ACPI data)
BIOS-e820: 0000000007fffc00 - 0000000008000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
Kernel command line: BOOT_IMAGE=linux ro root=307 hde=ide-scsi
ide_setup: hde=ide-scsi
Initializing CPU#0
Detected 701.606 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1399.19 BogoMIPS
Memory: 126304k/131008k available (1212k kernel code, 4316k reserved, 471k
data, 208k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router PIIX [8086/7110] at 00:07.0
PCI: Found IRQ 11 for device 00:04.0
PCI: Sharing IRQ 11 with 00:04.1
PCI: Sharing IRQ 11 with 01:00.0
PCI: Cannot allocate resource region 4 of device 00:07.1
got res[10000000:10000fff] for resource 0 of Texas Instruments PCI1225
got res[10001000:10001fff] for resource 0 of Texas Instruments PCI1225
(#2)
got res[1090:109f] for resource 4 of Intel Corporation 82371AB PIIX4 IDE
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.4.0 initialized
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.10d
block: queued sectors max/low 83861kB/27953kB, 256 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
hda: FUJITSU MHJ2181AT, ATA DISK drive
hdc: LS-120 SLIM3 00 UHD Floppy, ATAPI FLOPPY drive
hdd: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 35433216 sectors (18142 MB) w/512KiB Cache, CHS=2343/240/63
hdd: ATAPI 24X DVD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.12
hdc: 123264kB, 963/8/32 CHS, 533 kBps, 512 sector size, 720 rpm
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > hda4
floppy0: no floppy controllers found
task queue still active
loop: loaded (max 8 devices)
[drm] Initialized tdfx 1.0.0 20000928 on minor 63
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
PCI: Found IRQ 11 for device 00:04.0
PCI: Sharing IRQ 11 with 00:04.1
PCI: Sharing IRQ 11 with 01:00.0
PCI: Found IRQ 11 for device 00:04.1
PCI: Sharing IRQ 11 with 00:04.0
PCI: Sharing IRQ 11 with 01:00.0
Intel PCIC probe: not found.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Yenta IRQ list 06d8, PCI irq11
Socket status: 30000010
Yenta IRQ list 06d8, PCI irq11
Socket status: 30000010
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 208k freed
Adding Swap: 105804k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 03:32:27 Sep 8 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:07.2
PCI: Sharing IRQ 5 with 00:08.0
PCI: Sharing IRQ 5 with 00:10.0
usb-uhci.c: USB UHCI at I/O 0x1060, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
eth0: NE2000 (DL10019 rev 05): io 0x300, irq 3, hw_addr 00:E0:98:7C:EB:05
ttyS01 at port 0x02f8 (irq = 3) is a 16550A
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
PCI: Found IRQ 5 for device 00:08.0
PCI: Sharing IRQ 5 with 00:07.2
PCI: Sharing IRQ 5 with 00:10.0
maestro: Configuring ESS Maestro 2E found at IO 0x1400 IRQ 5
maestro: subvendor id: 0x009e1028
maestro: PCI power management capability: 0x7622
maestro: AC97 Codec detected: v: 0x83847609 caps: 0x6940 pwr: 0xf
maestro: 1 channels configured.
maestro: version 0.15 time 03:32:18 Sep 8 2001
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
paride: version 1.06 installed (parport)
pg: pg version 1.02, major 97
pg0: Autoprobe failed
pg: No ATAPI device detected
PPP generic driver version 2.4.1
PPP BSD Compression module registered
PPP Deflate Compression module registered
hdc: 1440kB, 2880 blocks, 512 sector size,
hdc: 1440kB, 80/2/18 CHS, 150 kBps, 512 sector size, 720 rpm
VFS: Disk change detected on device ide1(22,0)
hdc: hdc1 hdc2 hdc4
VFS: Disk change detected on device ide1(22,0)
hdc: hdc1 hdc2 hdc4
VFS: Disk change detected on device ide1(22,0)
hdc: hdc1 hdc2 hdc4
--
Del Segno Al Coda
Pete
Powered By
__
/ /= __ ___ __ __ __ __ __
/ /= / // |/ // // / // /
/ /__ / // /| / // _/ / > <==
/____/__//_/=|__//____/__/__/= SuSE 7.2 The DVD ROM Edition
==== == == === ==== == ==
"... ,because Unix is the best!"
Peter Pilgrim <mailto:[EMAIL PROTECTED]>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
