On Tue, 26 Feb 2002, Warly wrote: > Derrick J Brashear <[EMAIL PROTECTED]> writes: > > > I have a DVR-A03 which I have used successfully to burn CDs with (this > > version of) cdrecord (1.11a11). > > > > When used with DVD media (the sample piece which came with the drive) I > > have had but one dummy burn succeed, and all others fail at a random point > > with e.g.: > > [...] > > > Will I have better luck if I make some change to actually run at speed 1? > > Is there a guide on how to decode this information somewhere? Thus far my > > searches have turned up fruitless. > > Any success if you try with the cdrecord-dvdhack package that you can found > (in dao mode only): > > ftp.free.fr:/pub/Distributions_Linux/Mandrake-devel/cooker/i586/Mandrake/RPMS/
Same, see below. I got the drive documentation and apparently it only burns CD-Rs in 2x speed mode; However, this seems a somewhat bizarre error for a data underrun. cdrecord-dvdhack: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 19 38 B8 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 08 01 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x08 Qual 0x01 (logical unit communication time-out) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 2.007s timeout 200s write track data: error after 3385180160 bytes Sense Bytes: 70 00 00 00 00 00 00 0E 00 00 00 00 00 00 00 00 00 00 Writing time: 1229.897s -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]