On Wed, 27 Feb 2002, Joerg Schilling wrote: > A buffer underrun, activate DMA and it will work. > > >http://www.fokus.gmd.de/research/cc/glone/employees/joerg.schilling/private/problems.html
Drive which is feeding it is DMA-enabled. When I enable DMA on the DVR-A03: cdrecord-prodvd-1.11a13-i586-pc-linux-gnu -dummy -dao dev=0,0,0 -v disc1 Track 01: 0 of 4458 MB written.cdrecord-prodvd-1.11a13-i586-pc-linux-gnu: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 20 00 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x20 Qual 0x00 (invalid command operation code) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.006s timeout 100s write track data: error after 0 bytes Sense Bytes: 70 00 00 00 00 00 00 0E 00 00 00 00 00 00 00 00 00 00 Writing time: 5.100s If I also turn on 32 bit I/O it doesn't even get that far and instead offers: cdrecord-prodvd-1.11a13-i586-pc-linux-gnu: Data will not fit on any disk. cdrecord-prodvd-1.11a13-i586-pc-linux-gnu: Cannot write CD's >= 100 minutes. I also tried tweaking the DMA mode using various -X values to hdparm, with less success. This is with 2.4.3 as well as with stock 2.4.18; 2.4.18 with the IDE patch applied, incidentally not related to this, doesn't work on a machine with a PDC20267; It hangs probing drives hanging off the card. The system is running glibc 2.2.2 and is a dual processor Pentium 3 750. It started out as RedHat 7.1 but certainly isn't anymore. -D -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
