On Wed, 27 Feb 2002, Derrick J Brashear wrote: > cdrecord-prodvd-1.11a13-i586-pc-linux-gnu: Input/output error. write_g1: > scsi sendcmd: no error > CDB: 2A 00 00 04 9E 7B 00 00 1F 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 08 01 00 00 > Sense Key: 0x4 Hardware Error, Segment 0 > Sense Code: 0x08 Qual 0x01 (logical unit communication time-out) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 2.007s timeout 100s
Just to correlate this with some Pioneer documentation in case someone else later has the same problem and uses Google usefully: http://www.pioneerelectronics.com/Pioneer/Files/PIB273900_DVDRRW-Gen_FAQ.pdf includes: What if I get the error, -10 at sector XXXXX - command: 2A sense: 04 ASC: 08 ASCQ: 01 To correct this error, disable DMA from the drive. In addition, you may need to disable DMA for this channel on the motherboard. It's of course not useful for explaining why, but at least Pioneer seems to think this is "the right answer". -D -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]