>From: Gus Koumourdas <[EMAIL PROTECTED]> >I've been using cdrecord for nearly 2 years now without any problems. It >stopped working recently. The current version that I'm trying is from >cdrtools2.0pre23 and prior to it was cdrtools1.11alpha40.
>OS: >RedHat8.0 LinuxKernel 2.4.18-18.8.0 >glibc: >2.2.93-5 >Hardware: >CDR - Yamaha CRW3200E IDE using ATAPI SCSI Emulation. >Athlon 1800+ >The problems appeared after I upgraded to RH8. I've been using >Fireburner without any problems however I prefer X-CDRoast which is a >frontend for cdrecord. Below is the -v output from X-CDRoast. I get the >same error when I run it from the command line. It includes command line >and ATIP info. I've tried TAO, SAO, and RAW96R recording modes without >any luck. Let me know if you need additional info. --gusk >Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=1,0,0 >gracetime=2 fs=4096k driveropts=burnfree,noforcespeed -v -useinfo >speed=24 -dao -dummy -eject -pad -overburn -audio >"/home/gkoumour/record/enter_my_realm.wav" ... >scsidev: '1,0,0' >scsibus: 1 target: 0 lun: 0 >Linux sg driver version: 3.1.24 >pregap1: -1 >Cdrecord 1.11a40 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg >Schilling >TOC Type: 0 = CD-DA >Using libscg version 'schily-0.7' >Driveropts: 'burnfree,noforcespeed' >atapi: 1 >Device type : Removable CD-ROM >Version : 2 >Response Format: 2 >Capabilities : SYNC >Vendor_info : 'YAMAHA ' >Identifikation : 'CRW3200E ' >Revision : '1.0b' >Device seems to be: Generic mmc CD-RW. >Using generic SCSI-3/mmc CD-R driver (mmc_cdr). >Driver flags : MMC-3 SWABAUDIO BURNFREE AUDIOMASTER FORCESPEED >Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R >Drive buf size : 7469952 = 7294 KB >FIFO size : 4194304 = 4096 KB >Track 01: audio 276 MB (27:22.31) no preemp pad >Track 02: audio 49 MB (04:55.50) no preemp pad >Track 03: audio 111 MB (11:00.97) no preemp pad >Track 04: audio 336 MB (33:20.03) no preemp pad >Total size: 773 MB (76:38.86) = 344915 sectors >Lout start: 773 MB (76:40/65) = 344915 sectors >Current Secsize: 2048 >ATIP info from disk: >Indicated writing power: 5 >Is not unrestricted >Is not erasable >Disk sub type: Medium Type A, low Beta category (A-) (2) >ATIP start of lead in: -11634 (97:26/66) >ATIP start of lead out: 359849 (79:59/74) >Disk type: Short strategy type (Phthalocyanine or similar) >Manuf. index: 3 >Manufacturer: CMC Magnetics Corporation >Blocks total: 359849 Blocks current: 359849 Blocks remaining: 14934 >Forcespeed is OFF. >Starting to write CD/DVD at speed 24 in dummy SAO mode for single >session. >Waiting for reader process to fill input buffer ... >input buffer ready. >BURN-Free is OFF. >Turning BURN-Free on >Sending CUE sheet... >Writing pregap for track 1 at -150 >Starting new track at sector: 0 >cdrecord: Input/output error. write_g1: scsi sendcmd: no error >CDB: 2A 00 00 00 0B B5 00 00 1B 00 >status: 0x2 (CHECK CONDITION) >Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 00 00 00 >Sense Key: 0x5 Illegal Request, Segment 0 >Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0 >Sense flags: Blk 0 (not valid) >cmd finished after 0.002s timeout 200s >Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00 Check whether there is no "unfriendly" application that tries to do concurrent access to the drive. -----> Shut down all X applictations (inclusive the XDM login screen) I suspect that newer KDE versions mzy be the reason for such a behavior. If this is not possible write in single user mode. If this helps, try to find the reason ;-) Jörg EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin [EMAIL PROTECTED] (uni) If you don't have iso-8859-1 [EMAIL PROTECTED] (work) chars I am J"org Schilling URL: http://www.fokus.fhg.de/usr/schilling ftp://ftp.berlios.de/pub/schily -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]