Hi J�rg, > As this happens after 1 MB (<= than the RAM size) it may be a > buffer underrun. > Check transfer speeds..... > > It however looks like the drives does not like the medium. > Call cdrecord -atip
Hmm, I'm not sure - I managed to burn several of these disks using growisofs, and then mount the disks on my Mac (as well as on this linux box) so I *think* the media are OK? Anyway, attached is the output from "cdrecord-ProDVD dev=0,0,0 -atip" and it doesn't look good... although I'm not sure what it is telling us. BTW: Are there any "dangers" with using the "-atip" option? Since I used it, I haven't been able to mount *any* DVD media on this drive - it was working OK before (I had been checking through the backups I made on Wed. to make sure they were *still* OK) but after trying the -atip test I now can't access *any* DVD on this drive... not even DVD-ROM or movies. I *can* still mount CD's though. It's probably just a coincidence, but I thought I'd better ask in case there were any known issues, as at present my *cheap* DVD burner has turned in to an *expensive* CD reader... Which is inconvenient, to say the least! Thanks again. Cheers for now, -atip output attached, [EMAIL PROTECTED] /root # cdrecord-ProDVD dev=0,0,0 -atip Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003 J�rg Schilling Unlocked features: ProDVD Clone Limited features: This copy of cdrecord is licensed for: private/research/educational_non-commercial_use scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.20 Using libscg version 'schily-0.7' Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'DVDRW ' Identifikation : 'IDE1004 ' Revision : '0040' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R /home/ian/src/cdrecord-prodvd-2.01a12-i586-pc: Input/output error. test unit ready: scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 01 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x01 (medium not present - tray closed) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.000s timeout 40s /home/ian/src/cdrecord-prodvd-2.01a12-i586-pc: No disk / Wrong disk! [EMAIL PROTECTED] /root # -- Ian ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ******************************************************************** -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
