Rob, > >It's probably just a coincidence, but I thought I'd better > ask in case there were any known issues, as at present my > *cheap* DVD burner has turned in to an *expensive* CD reader... > >Which is inconvenient, to say the least! > > > I have to say that this looks almost identical to the > problems (no/wrong > disk) I had with my Pioneer before I upgraded the firmware. After > upgrade the problems all went away. Unfortunately you may not > be able to > get an upgrade for this drive, unless you can find out who made it.
Well, after the following advice from Jörg, I took the drive back to the shop. The replacement is reading disks again... works OK with growisofs, haven't got round to burnng any DVD- type disks, so can't comment on it's behaviour with cdrecord yet. > >There was a Verbatim 4x DVD-R disk in the drive when I ran > >this test, the same as the media I have been trying to burn. > > Then the drive is broken and needs to be replaced .... or it > needs better firmware. Yup, I think it was broken - the replacement seems better - so far! Does someone keep a list of drive types etc.? When the drive was broken, I tried to find out about it, looking for firmware upgrades etc... The packaging was badged Pika One - seems to be a company formed by the people behind LaCie, but I couldn't tell if the new company (or the hardware they sell) was related to LaCie or not. The new drive is labelled as being manufactured in China by Top-Glory Electronics (which I think is a contract manufacture organisation.) My search for firmware lead me to a BTC run website. Interestingly, the replacement drive has a later firmware revision installed than the one that failed. Hopefully this is a good sign! Thanks for all the input. Cheers for now, -- Ian ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ******************************************************************** -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]