On 05/24/2012 09:10 AM, Stefan Priebe - Profihost AG wrote:
Hi list,
today while testing btrfs i discovered a very poor osd performance using
kernel 3.4.
Underlying FS is XFS but it is the same with btrfs.
3.0.30:
~# rados -p data bench 10 write -t 16
Maintaining 16 concurrent writes of 4194304 bytes for at least 10 seconds.
sec Cur ops started finished avg MB/s cur MB/s last lat avg lat
0 0 0 0 0 0 - 0
1 16 41 25 99.9767 100 0.586984 0.447293
2 16 71 55 109.979 120 0.934388 0.488375
3 16 99 83 110.647 112 1.15982 0.503111
4 16 130 114 113.981 124 1.05952 0.516925
5 16 159 143 114.382 116 0.149313 0.510734
6 16 188 172 114.649 116 0.287166 0.52203
7 16 215 199 113.697 108 0.151784 0.531461
8 16 242 226 112.984 108 0.623478 0.539896
9 16 265 249 110.651 92 0.50354 0.538504
10 16 296 280 111.984 124 0.155048 0.542846
Total time run: 10.776153
Total writes made: 297
Write size: 4194304
Bandwidth (MB/sec): 110.243
Average Latency: 0.577534
Max latency: 1.85499
Min latency: 0.091473
3.4:
~# rados -p data bench 10 write -t 16
Maintaining 16 concurrent writes of 4194304 bytes for at least 10 seconds.
sec Cur ops started finished avg MB/s cur MB/s last lat avg lat
0 0 0 0 0 0 - 0
1 16 40 24 95.9794 96 0.393196 0.455936
2 16 68 52 103.983 112 0.835652 0.517297
3 16 85 69 91.9849 68 1.00535 0.493058
4 16 96 80 79.9869 44 0.096564 0.577948
5 16 103 87 69.5879 28 0.092722 0.589147
6 16 117 101 67.3216 56 0.222175 0.675334
7 16 130 114 65.1321 52 0.15677 0.623806
8 16 144 128 63.9896 56 0.089157 0.56746
9 16 144 128 56.8794 0 - 0.56746
10 16 144 128 51.1912 0 - 0.56746
11 16 144 128 46.5373 0 - 0.56746
12 16 144 128 42.6591 0 - 0.56746
13 16 144 128 39.3776 0 - 0.56746
14 16 144 128 36.5649 0 - 0.56746
15 16 144 128 34.1272 0 - 0.56746
16 16 145 129 32.2443 0.5 11.3422 0.650985
Total time run: 16.193871
Total writes made: 145
Write size: 4194304
Bandwidth (MB/sec): 35.816
Average Latency: 1.78467
Max latency: 14.4744
Min latency: 0.088753
Stefan
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
I setup some tests today to try to replicate your findings (and also
check results against some previous ones I've done). I don't think I'm
seeing exactly the same results as you, but I definitely see xfs
performing worse in this specific test than btrfs. I've included the
results here.
Distro: Ubuntu Oneiric (IE no syncfs in glibc)
Ceph: 0.47.2
Kernel 3.4.0-ceph (autobuild-ceph@gitbuilder-kernel-amd64)
Network: 10GbE
1 Client node
3 Mon nodes
2 OSD nodes with 1 OSD each mounted on a 7200rpm SAS drive. H700 Raid
controller with each drive in a 1 disk raid0. Journals are partitioned
on a separate drive. OSD data disks are using WT cache while journals
are using WB.
btrfs created with -l 64k -n64k, mounted using noatime.
xfs created with -f -d su=64k,sw=1 -i size=2048, mounted using noatime.
rados bench invocation: rados -p data bench 300 write -t 16 -b 4194304
btrfs:
Total time run: 300.413696
Total writes made: 7582
Write size: 4194304
Bandwidth (MB/sec): 100.954
Average Latency: 0.633932
Max latency: 3.78661
Min latency: 0.065734
xfs:
Total time run: 304.435966
Total writes made: 5023
Write size: 4194304
Bandwidth (MB/sec): 65.997
Average Latency: 0.96965
Max latency: 36.4993
Min latency: 0.07516
Full results are available here:
http://nhm.ceph.com/results/mailinglist-tests/
I created seekwatcher movies by running blktrace on the underlying OSD
data disks during the tests. These show throughput over time,
seeks/sec, and visual representation of where the disk is being written
to for each OSD. You can see them here:
http://nhm.ceph.com/movies/mailinglist-tests/
As you can see, at least for the quick tests I did this afternoon, the
performance of the underlying OSD disk is highly correlated with the
number of seeks being done. These results may improve with syncfs
support in Ubuntu 12.04. If you have your journals on the same disks as
the OSDs, that will cause even more seeks (in addition to the additional
to the greater throughput demands). These are things that we are
actively investigating and hopefully will be able to improve over the
coming months.
Thanks,
Mark
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html