Thank you very much. But the mds still don’t go active.
While trying to resolve this, I run:
ceph mds rmfailed 0 --yes-i-really-mean-it
ceph mds rmfailed 1 --yes-i-really-mean-it
Then 3 out of 5 MONs crashed. I was able to keep MON up by making
MDSMonitor::maybe_resize_cluster return false directly with gdb. Then I set
max_mds back to 2. Now my MONs does not crash.
I’ve really learnt a lesson from this..
Now I suppose I need to figure out how to undo the “mds rmfailed” command?
Current “ceph fs dump”: (note 7 is added to “incompat”, “max_mds” is 2,
“failed” is cleared)
e41448
enable_multiple, ever_enabled_multiple: 0,1
default compat: compat={},rocompat={},incompat={1=base v0.20,2=client writeable
ranges,3=default file layouts on dirs,4=dir inode in separate object,5=mds uses
versioned encoding,6=dirfrag is stored in omap,8=no anchor table,9=file layout
v2,10=snaprealm v2}
legacy client fscid: 2
Filesystem 'cephfs' (2)
fs_name cephfs
epoch 41442
flags 12
created 2020-09-15T04:10:53.585782+0000
modified 2021-09-17T17:51:57.582372+0000
tableserver 0
root 0
session_timeout 60
session_autoclose 300
max_file_size 1099511627776
required_client_features {}
last_failure 0
last_failure_osd_epoch 43315
compat compat={},rocompat={},incompat={1=base v0.20,2=client writeable
ranges,3=default file layouts on dirs,4=dir inode in separate object,5=mds uses
versioned encoding,6=dirfrag is stored in omap,7=mds uses inline data,8=no
anchor table,9=file layout v2,10=snaprealm v2}
max_mds 2
in 0,1
up {}
failed
damaged
stopped
data_pools [5,13,16]
metadata_pool 4
inline_data disabled
balancer
standby_count_wanted 1
Standby daemons:
[mds.cephfs.gpu024.rpfbnh{-1:7918294} state up:standby seq 1 join_fscid=2 addr
[v2:202.38.247.187:6800/94739959,v1:202.38.247.187:6801/94739959] compat
{c=[1],r=[1],i=[7ff]}]
dumped fsmap epoch 41448
发件人: Patrick Donnelly<mailto:pdonn...@redhat.com>
发送时间: 2021年9月18日 0:24
收件人: 胡 玮文<mailto:huw...@outlook.com>
抄送: Eric Dold<mailto:dold.e...@gmail.com>; ceph-users<mailto:ceph-users@ceph.io>
主题: Re: [ceph-users] Re: Cephfs - MDS all up:standby, not becoming up:active
On Fri, Sep 17, 2021 at 11:11 AM 胡 玮文 <huw...@outlook.com> wrote:
>
> We are experiencing the same when upgrading to 16.2.6 with cephadm.
>
>
>
> I tried
>
>
>
> ceph fs set cephfs max_mds 1
>
> ceph fs set cephfs allow_standby_replay false
>
>
>
> , but still all MDS goes to standby. It seems all ranks are marked failed. Do
> we have a way to clear this flag?
> [...]
> compat compat={},rocompat={},incompat={1=base v0.20,2=client writeable
> ranges,3=default file layouts on dirs,4=dir inode in separate object,5=mds
> uses versioned encoding,6=dirfrag is stored in omap,8=no anchor table,9=file
> layout v2,10=snaprealm v2}
Please run:
ceph fs compat add_incompat cephfs 7 "mds uses inline data"
--
Patrick Donnelly, Ph.D.
He / Him / His
Principal Software Engineer
Red Hat Sunnyvale, CA
GPG: 19F28A586F808C2402351B93C3301A3E258DD79D
_______________________________________________
ceph-users mailing list -- ceph-users@ceph.io
To unsubscribe send an email to ceph-users-le...@ceph.io
