On Mon, Nov 4, 2013 at 9:55 AM, Trivedi, Narendra <narendra.triv...@savvis.com> wrote: > Are you saying despite the osdir error message (I am pasting again below from > my posting yesterday) the OSDs are successfully prepared? > > [ceph_deploy.osd][ERROR ] OSError: [Errno 2] No such file or directory > [ceph_deploy][ERROR ] GenericError: Failed to create 2 OSDs >
Not these, they do look like genuine errors to me. I meant, remote commands (those appear to be local as you see `ceph_deploy` as the host). For example `wget` is a known offender (from your output): [ceph-node1-mon-centos-6-4][ERROR ] Proxy request sent, awaiting response... 200 OK > Thanks! > Narendra > -----Original Message----- > From: Alfredo Deza [mailto:alfredo.d...@inktank.com] > Sent: Saturday, November 02, 2013 12:03 PM > To: Sage Weil > Cc: Trivedi, Narendra; ceph-users@lists.ceph.com > Subject: Re: [ceph-users] Very frustrated with Ceph! > > On Fri, Nov 1, 2013 at 11:12 PM, Sage Weil <s...@inktank.com> wrote: >> On Sat, 2 Nov 2013, Trivedi, Narendra wrote: >>> >>> Hi Sage, >>> >>> I believe I issued a "ceph-deploy install..." from the admin node as >>> per the documentation and that was almost ok as per the output of the >>> command below except sometimes there?s an error followed by an ?OK? >>> message (see the highlighted item in the red below). I eventually ran >>> into some permission issues but seems things went okay: > > Maybe what can be confusing here is that ceph-deploy interprets stderr as > ERROR logging level. Unfortunately, some tools will output normal informative > data to stderr when they are clearly not errors. > > stdout, on the other hand, is interpreted by ceph-deploy as DEBUG level, so > you will see logging at that level too. > > There is no way for ceph-deploy to tell if you are actually seeing errors > because the tool is in fact sending error messages or because it decided to > use stderr to send information that should go to stdout. > > > >> >> Hmm, the below output makes it look like it was successfully installed >> on >> node1 node2 and node3. Can you confirm that /etc/ceph exists on all >> three of those hosts? >> >> Oh, looking back at your original message, it looks like you are >> trying to create OSDs on /tmp/osd*. I would create directories like >> /ceph/osdo, /ceph/osd1, or similar. I believe you need to create the >> directories beforehand, too. (In a normal deployment, you are either >> feeding ceph raw disks (/dev/XXX) or an existing mount point on a >> dedicated disk you already configured and mounted.) >> >> sage >> >> >> > >>> >>> >>> [ceph@ceph-admin-node-centos-6-4 my-cluster]$ ceph-deploy install >>> ceph-node1-mon-centos-6-4 ceph-node2-osd0-centos-6-4 >>> ceph-node3-osd1-centos-6-4 >>> >>> [ceph_deploy.cli][INFO ] Invoked (1.3): /usr/bin/ceph-deploy install >>> ceph-node1-mon-centos-6-4 ceph-node2-osd0-centos-6-4 >>> ceph-node3-osd1-centos-6-4 >>> >>> [ceph_deploy.install][DEBUG ] Installing stable version dumpling on >>> cluster ceph hosts ceph-node1-mon-centos-6-4 >>> ceph-node2-osd0-centos-6-4 >>> ceph-node3-osd1-centos-6-4 >>> >>> [ceph_deploy.install][DEBUG ] Detecting platform for host >>> ceph-node1-mon-centos-6-4 ... >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] connected to host: >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] detect platform information from >>> remote host >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] detect machine type >>> >>> [ceph_deploy.install][INFO ] Distro info: CentOS 6.4 Final >>> >>> [ceph-node1-mon-centos-6-4][INFO ] installing ceph on >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][INFO ] adding EPEL repository >>> >>> [ceph-node1-mon-centos-6-4][INFO ] Running command: sudo wget >>> http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch >>> .rpm >>> >>> [ceph-node1-mon-centos-6-4][ERROR ] --2013-11-01 19:51:20-- >>> http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch >>> .rpm >>> >>> [ceph-node1-mon-centos-6-4][ERROR ] Connecting to 10.12.132.208:8080... >>> connected. >>> >>> [ceph-node1-mon-centos-6-4][ERROR ] Proxy request sent, awaiting response... >>> 200 OK >>> >>> [ceph-node1-mon-centos-6-4][ERROR ] Length: 14540 (14K) >>> [application/x-rpm] >>> >>> [ceph-node1-mon-centos-6-4][ERROR ] Saving to: >>> `epel-release-6-8.noarch.rpm.2' >>> >>> [ceph-node1-mon-centos-6-4][ERROR ] >>> >>> [ceph-node1-mon-centos-6-4][ERROR ] 0K .......... >>> .... 100% 4.79M=0.003s >>> >>> [ceph-node1-mon-centos-6-4][ERROR ] >>> >>> [ceph-node1-mon-centos-6-4][ERROR ] Last-modified header invalid -- >>> time-stamp ignored. >>> >>> [ceph-node1-mon-centos-6-4][ERROR ] 2013-11-01 19:52:20 (4.79 MB/s) - >>> `epel-release-6-8.noarch.rpm.2' saved [14540/14540] >>> >>> [ceph-node1-mon-centos-6-4][ERROR ] >>> >>> [ceph-node1-mon-centos-6-4][INFO ] Running command: sudo rpm -Uvh >>> --replacepkgs epel-release-6*.rpm >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] Preparing... >>> ################################################## >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] epel-release >>> ################################################## >>> >>> [ceph-node1-mon-centos-6-4][INFO ] Running command: sudo rpm >>> --import >>> https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc >>> >>> [ceph-node1-mon-centos-6-4][INFO ] Running command: sudo rpm -Uvh >>> --replacepkgs >>> http://ceph.com/rpm-dumpling/el6/noarch/ceph-release-1-0.el6.noarch.r >>> pm >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] Retrieving >>> http://ceph.com/rpm-dumpling/el6/noarch/ceph-release-1-0.el6.noarch.r >>> pm >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] Preparing... >>> ################################################## >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] ceph-release >>> ################################################## >>> >>> [ceph-node1-mon-centos-6-4][INFO ] Running command: sudo yum -y -q >>> install ceph >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] Package ceph-0.67.4-0.el6.x86_64 >>> already installed and latest version >>> >>> [ceph-node1-mon-centos-6-4][INFO ] Running command: sudo ceph >>> --version >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] ceph version 0.67.4 >>> (ad85b8bfafea6232d64cb7ba76a8b6e8252fa0c7) >>> >>> [ceph_deploy.install][DEBUG ] Detecting platform for host >>> ceph-node2-osd0-centos-6-4 ... >>> >>> [ceph-node2-osd0-centos-6-4][DEBUG ] connected to host: >>> ceph-node2-osd0-centos-6-4 >>> >>> [ceph-node2-osd0-centos-6-4][DEBUG ] detect platform information from >>> remote host >>> >>> [ceph-node2-osd0-centos-6-4][DEBUG ] detect machine type >>> >>> [ceph_deploy.install][INFO ] Distro info: CentOS 6.4 Final >>> >>> [ceph-node2-osd0-centos-6-4][INFO ] installing ceph on >>> ceph-node2-osd0-centos-6-4 >>> >>> [ceph-node2-osd0-centos-6-4][INFO ] adding EPEL repository >>> >>> [ceph-node2-osd0-centos-6-4][INFO ] Running command: sudo wget >>> http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch >>> .rpm >>> >>> [ceph-node2-osd0-centos-6-4][ERROR ] --2013-11-01 19:52:54-- >>> http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch >>> .rpm >>> >>> [ceph-node2-osd0-centos-6-4][ERROR ] Connecting to 10.12.132.208:8080... >>> connected. >>> >>> [ceph-node2-osd0-centos-6-4][ERROR ] Proxy request sent, awaiting >>> response... 200 OK >>> >>> [ceph-node2-osd0-centos-6-4][ERROR ] Length: 14540 (14K) >>> [application/x-rpm] >>> >>> [ceph-node2-osd0-centos-6-4][ERROR ] Saving to: >>> `epel-release-6-8.noarch.rpm.1' >>> >>> [ceph-node2-osd0-centos-6-4][ERROR ] >>> >>> [ceph-node2-osd0-centos-6-4][ERROR ] 0K .......... >>> .... 100% 5.56M=0.002s >>> >>> [ceph-node2-osd0-centos-6-4][ERROR ] >>> >>> [ceph-node2-osd0-centos-6-4][ERROR ] Last-modified header invalid -- >>> time-stamp ignored. >>> >>> [ceph-node2-osd0-centos-6-4][ERROR ] 2013-11-01 19:53:54 (5.56 MB/s) >>> - `epel-release-6-8.noarch.rpm.1' saved [14540/14540] >>> >>> [ceph-node2-osd0-centos-6-4][ERROR ] >>> >>> [ceph-node2-osd0-centos-6-4][INFO ] Running command: sudo rpm -Uvh >>> --replacepkgs epel-release-6*.rpm >>> >>> [ceph-node2-osd0-centos-6-4][DEBUG ] Preparing... >>> ################################################## >>> >>> [ceph-node2-osd0-centos-6-4][DEBUG ] epel-release >>> ################################################## >>> >>> [ceph-node2-osd0-centos-6-4][INFO ] Running command: sudo rpm >>> --import >>> https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc >>> >>> [ceph-node2-osd0-centos-6-4][INFO ] Running command: sudo rpm -Uvh >>> --replacepkgs >>> http://ceph.com/rpm-dumpling/el6/noarch/ceph-release-1-0.el6.noarch.r >>> pm >>> >>> [ceph-node2-osd0-centos-6-4][DEBUG ] Retrieving >>> http://ceph.com/rpm-dumpling/el6/noarch/ceph-release-1-0.el6.noarch.r >>> pm >>> >>> [ceph-node2-osd0-centos-6-4][DEBUG ] Preparing... >>> ################################################## >>> >>> [ceph-node2-osd0-centos-6-4][DEBUG ] ceph-release >>> ################################################## >>> >>> [ceph-node2-osd0-centos-6-4][INFO ] Running command: sudo yum -y -q >>> install ceph >>> >>> [ceph-node2-osd0-centos-6-4][DEBUG ] Package ceph-0.67.4-0.el6.x86_64 >>> already installed and latest version >>> >>> [ceph-node2-osd0-centos-6-4][INFO ] Running command: sudo ceph >>> --version >>> >>> [ceph-node2-osd0-centos-6-4][DEBUG ] ceph version 0.67.4 >>> (ad85b8bfafea6232d64cb7ba76a8b6e8252fa0c7) >>> >>> [ceph_deploy.install][DEBUG ] Detecting platform for host >>> ceph-node3-osd1-centos-6-4 ... >>> >>> [ceph-node3-osd1-centos-6-4][DEBUG ] connected to host: >>> ceph-node3-osd1-centos-6-4 >>> >>> [ceph-node3-osd1-centos-6-4][DEBUG ] detect platform information from >>> remote host >>> >>> [ceph-node3-osd1-centos-6-4][DEBUG ] detect machine type >>> >>> [ceph_deploy.install][INFO ] Distro info: CentOS 6.4 Final >>> >>> [ceph-node3-osd1-centos-6-4][INFO ] installing ceph on >>> ceph-node3-osd1-centos-6-4 >>> >>> [ceph-node3-osd1-centos-6-4][INFO ] adding EPEL repository >>> >>> [ceph-node3-osd1-centos-6-4][INFO ] Running command: sudo wget >>> http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch >>> .rpm >>> >>> [ceph-node3-osd1-centos-6-4][ERROR ] --2013-11-01 19:54:17-- >>> http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch >>> .rpm >>> >>> [ceph-node3-osd1-centos-6-4][ERROR ] Connecting to 10.12.132.208:8080... >>> connected. >>> >>> [ceph-node3-osd1-centos-6-4][ERROR ] Proxy request sent, awaiting >>> response... 200 OK >>> >>> [ceph-node3-osd1-centos-6-4][ERROR ] Length: 14540 (14K) >>> [application/x-rpm] >>> >>> [ceph-node3-osd1-centos-6-4][ERROR ] Saving to: >>> `epel-release-6-8.noarch.rpm.1' >>> >>> [ceph-node3-osd1-centos-6-4][ERROR ] >>> >>> [ceph-node3-osd1-centos-6-4][ERROR ] 0K .......... >>> .... 100% 5.37M=0.003s >>> >>> [ceph-node3-osd1-centos-6-4][ERROR ] >>> >>> [ceph-node3-osd1-centos-6-4][ERROR ] Last-modified header invalid -- >>> time-stamp ignored. >>> >>> [ceph-node3-osd1-centos-6-4][ERROR ] 2013-11-01 19:55:16 (5.37 MB/s) >>> - `epel-release-6-8.noarch.rpm.1' saved [14540/14540] >>> >>> [ceph-node3-osd1-centos-6-4][ERROR ] >>> >>> [ceph-node3-osd1-centos-6-4][INFO ] Running command: sudo rpm -Uvh >>> --replacepkgs epel-release-6*.rpm >>> >>> [ceph-node3-osd1-centos-6-4][DEBUG ] Preparing... >>> ################################################## >>> >>> [ceph-node3-osd1-centos-6-4][DEBUG ] epel-release >>> ################################################## >>> >>> [ceph-node3-osd1-centos-6-4][INFO ] Running command: sudo rpm >>> --import >>> https://ceph.com/git/?p=ceph.git;a=blob_plain;f=keys/release.asc >>> >>> [ceph-node3-osd1-centos-6-4][INFO ] Running command: sudo rpm -Uvh >>> --replacepkgs >>> http://ceph.com/rpm-dumpling/el6/noarch/ceph-release-1-0.el6.noarch.r >>> pm >>> >>> [ceph-node3-osd1-centos-6-4][DEBUG ] Retrieving >>> http://ceph.com/rpm-dumpling/el6/noarch/ceph-release-1-0.el6.noarch.r >>> pm >>> >>> [ceph-node3-osd1-centos-6-4][DEBUG ] Preparing... >>> ################################################## >>> >>> [ceph-node3-osd1-centos-6-4][DEBUG ] ceph-release >>> ################################################## >>> >>> [ceph-node3-osd1-centos-6-4][INFO ] Running command: sudo yum -y -q >>> install ceph >>> >>> [ceph-node3-osd1-centos-6-4][DEBUG ] Package ceph-0.67.4-0.el6.x86_64 >>> already installed and latest version >>> >>> [ceph-node3-osd1-centos-6-4][INFO ] Running command: sudo ceph >>> --version >>> >>> [ceph-node3-osd1-centos-6-4][DEBUG ] ceph version 0.67.4 >>> (ad85b8bfafea6232d64cb7ba76a8b6e8252fa0c7) >>> >>> [ceph@ceph-admin-node-centos-6-4 my-cluster]$ ceph-deploy mon create >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph_deploy.cli][INFO ] Invoked (1.3): /usr/bin/ceph-deploy mon >>> create >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph_deploy.mon][DEBUG ] Deploying mon, cluster ceph hosts >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph_deploy.mon][DEBUG ] detecting platform for host >>> ceph-node1-mon-centos-6-4 ... >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] connected to host: >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] detect platform information from >>> remote host >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] detect machine type >>> >>> [ceph_deploy.mon][INFO ] distro info: CentOS 6.4 Final >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] determining if provided host has >>> same hostname in remote >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] get remote short hostname >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] deploying mon to >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] get remote short hostname >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] remote hostname: >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] write cluster configuration to >>> /etc/ceph/{cluster}.conf >>> >>> [ceph_deploy.mon][ERROR ] RuntimeError: config file >>> /etc/ceph/ceph.conf exists with different content; use >>> --overwrite-conf to overwrite >>> >>> [ceph_deploy][ERROR ] GenericError: Failed to create 1 monitors >>> >>> [ceph@ceph-admin-node-centos-6-4 my-cluster]$ ceph-deploy mon create >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph_deploy.cli][INFO ] Invoked (1.3): /usr/bin/ceph-deploy mon >>> create >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph_deploy.mon][DEBUG ] Deploying mon, cluster ceph hosts >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph_deploy.mon][DEBUG ] detecting platform for host >>> ceph-node1-mon-centos-6-4 ... >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] connected to host: >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] detect platform information from >>> remote host >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] detect machine type >>> >>> [ceph_deploy.mon][INFO ] distro info: CentOS 6.4 Final >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] determining if provided host has >>> same hostname in remote >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] get remote short hostname >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] deploying mon to >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] get remote short hostname >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] remote hostname: >>> ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] write cluster configuration to >>> /etc/ceph/{cluster}.conf >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] create the mon path if it does >>> not exist >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] checking for done path: >>> /var/lib/ceph/mon/ceph-ceph-node1-mon-centos-6-4/done >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] done path does not exist: >>> /var/lib/ceph/mon/ceph-ceph-node1-mon-centos-6-4/done >>> >>> [ceph-node1-mon-centos-6-4][INFO ] creating tmp path: >>> /var/lib/ceph/tmp >>> >>> [ceph-node1-mon-centos-6-4][INFO ] creating keyring file: >>> /var/lib/ceph/tmp/ceph-ceph-node1-mon-centos-6-4.mon.keyring >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] create the monitor keyring file >>> >>> [ceph-node1-mon-centos-6-4][INFO ] Running command: sudo ceph-mon >>> --cluster ceph --mkfs -i ceph-node1-mon-centos-6-4 --keyring >>> /var/lib/ceph/tmp/ceph-ceph-node1-mon-centos-6-4.mon.keyring >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] ceph-mon: mon.noname-a >>> 10.12.0.70:6789/0 is local, renaming to mon.ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] ceph-mon: set fsid to >>> c732fc5f-a656-401a-a8e5-4bfed1f89d20 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] ceph-mon: created monfs at >>> /var/lib/ceph/mon/ceph-ceph-node1-mon-centos-6-4 for >>> mon.ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][INFO ] unlinking keyring file >>> /var/lib/ceph/tmp/ceph-ceph-node1-mon-centos-6-4.mon.keyring >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] create a done file to avoid >>> re-doing the mon deployment >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] create the init path if it does >>> not exist >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] locating the `service` executable... >>> >>> [ceph-node1-mon-centos-6-4][INFO ] Running command: sudo >>> /sbin/service ceph -c /etc/ceph/ceph.conf start >>> mon.ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] === mon.ceph-node1-mon-centos-6-4 >>> === >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] Starting Ceph >>> mon.ceph-node1-mon-centos-6-4 on ceph-node1-mon-centos-6-4... >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] Starting ceph-create-keys on >>> ceph-node1-mon-centos-6-4... >>> >>> [ceph-node1-mon-centos-6-4][INFO ] Running command: sudo ceph >>> --cluster=ceph --admin-daemon >>> /var/run/ceph/ceph-mon.ceph-node1-mon-centos-6-4.asok mon_status >>> >>> [ceph-node1-mon-centos-6-4][DEBUG >>> ]******************************************************************** >>> ******* >>> ***** >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] status for monitor: >>> mon.ceph-node1-mon-centos-6-4 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] { >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "election_epoch": 2, >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "extra_probe_peers": [], >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "monmap": { >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "created": "0.000000", >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "epoch": 1, >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "fsid": >>> "c732fc5f-a656-401a-a8e5-4bfed1f89d20", >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "modified": "0.000000", >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "mons": [ >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] { >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "addr": "10.12.0.70:6789/0", >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "name": >>> "ceph-node1-mon-centos-6-4", >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "rank": 0 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] } >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] ] >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] }, >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "name": "ceph-node1-mon-centos-6-4", >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "outside_quorum": [], >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "quorum": [ >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] 0 >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] ], >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "rank": 0, >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "state": "leader", >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] "sync_provider": [] >>> >>> [ceph-node1-mon-centos-6-4][DEBUG ] } >>> >>> [ceph-node1-mon-centos-6-4][DEBUG >>> ]******************************************************************** >>> ******* >>> ***** >>> >>> [ceph-node1-mon-centos-6-4][INFO ] monitor: >>> mon.ceph-node1-mon-centos-6-4 is running >>> >>> [ceph-node1-mon-centos-6-4][INFO ] Running command: sudo ceph >>> --cluster=ceph --admin-daemon >>> /var/run/ceph/ceph-mon.ceph-node1-mon-centos-6-4.asok mon_status >>> >>> >>> >>> Thanks! >>> >>> Narendra >>> >>> -----Original Message----- >>> From: Sage Weil [mailto:s...@inktank.com] >>> Sent: Friday, November 01, 2013 8:37 PM >>> To: Trivedi, Narendra >>> Cc: ceph-users@lists.ceph.com >>> Subject: Re: [ceph-users] Very frustrated with Ceph! >>> >>> >>> >>> On Sat, 2 Nov 2013, Trivedi, Narendra wrote: >>> >>> > [ceph-node2-osd0-centos-6-4][WARNIN] osd keyring does not exist >>> > yet, >>> >>> > creating one >>> >>> > >>> >>> > [ceph-node2-osd0-centos-6-4][DEBUG ] create a keyring file >>> >>> > >>> >>> > [ceph_deploy.osd][ERROR ] OSError: [Errno 2] No such file or >>> > directory >>> >>> >>> >>> Did you do 'ceph-deploy install ...' on these hosts? >>> >>> >>> >>> sage >>> >>> >>> This message contains information which may be confidential and/or >>> privileged. Unless you are the intended recipient (or authorized to >>> receive for the intended recipient), you may not read, use, copy or >>> disclose to anyone the message or any information contained in the >>> message. If you have received the message in error, please advise the >>> sender by reply e-mail and delete the message and any attachment(s) >>> thereto without retaining any copies. >>> >>> >> >> _______________________________________________ >> ceph-users mailing list >> ceph-users@lists.ceph.com >> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com >> > > This message contains information which may be confidential and/or > privileged. Unless you are the intended recipient (or authorized to receive > for the intended recipient), you may not read, use, copy or disclose to > anyone the message or any information contained in the message. If you have > received the message in error, please advise the sender by reply e-mail and > delete the message and any attachment(s) thereto without retaining any copies. _______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
