That was it! Thank you so much for your help, Marko! What a silly thing for me to miss!
<3 Trilliams Sent from my iPhone > On Jun 19, 2017, at 8:12 PM, Marko Sluga <ma...@markocloud.com> wrote: > > Sorry, > > rbd_user = volumes > > Not client.volumes > > > > ---- On Mon, 19 Jun 2017 21:09:38 -0400 ma...@markocloud.com wrote ---- > > Hi Nichole, > > Yeah, your setup looks is ok, so the only thing here could be an auth issue. > So I went through the config again and I see you have set the client.volumes > ceph user with rwx permissions on the volumes pool. > > In your cinder.conf the setup is: > > rbd_user = cinder > > Unless the cinder ceph user also exists, this is probably incorrectly set and > I would say you would need to change that setting to: > > rbd_user = client.volumes > > Regards, Marko > > ---- On Mon, 19 Jun 2017 20:50:47 -0400 tribe...@tribecc.us wrote ---- > > Hi Marko! > > Here’s my details: > > OpenStack Newton deployed with PackStack [controller + network node} > Ceph Kraken 3-node setup deployed with ceph-ansible > > # cat /etc/redhat-release > Red Hat Enterprise Linux Server release 7.3 (Maipo) > > # ceph --version > ceph version 11.2.0 (f223e27eeb35991352ebc1f67423d4ebc252adb7) > > # rpm -qa | grep librados > libradosstriper1-11.2.0-0.el7.x86_64 > librados2-11.2.0-0.el7.x86_64 > > # cinder --version > 1.9.0 > > # nova-manage --version > 14.0.3 > > If it matters, both glance & nova connected without a hitch. It’s just cinder > that’s causing a headache. > > T. Nichole Williams > tribe...@tribecc.us > > > > On Jun 19, 2017, at 7:34 PM, Marko Sluga <ma...@markocloud.com> wrote: > > Hi Nichole, > > Since your config is ok. > > I'm going to need more details on the OpenStack release, the hypervisor, > linux and librados versions. > > You could also test if you can try and monut a volume from your os and/or > hypervisor and the machine that runs the cinder volume service to start with. > > Regards, Marko > > > ---- On Mon, 19 Jun 2017 17:59:48 -0400 tribe...@tribecc.us wrote ---- > > Hi Marko, > > Here’s’ my ceph config: > > [ceph] > volume_driver = cinder.volume.drivers.rbd.RBDDriver > volume_backend_name = ceph > rbd_pool = volumes > rbd_ceph_conf = /etc/ceph/ceph.conf > rbd_flatten_volume_from_snapshot = false > rbd_max_clone_depth = 5 > rbd_store_chunk_size = 4 > rados_connect_timeout = -1 > rbd_user = cinder > rbd_secret_uuid = c80d6505-260c-48c1-a248-7144cd5d5aab > filter_function = "volume.size >= 2" > > Setting logging to “debug” doesn’t seem to produce any new information. > Here’s a snippet of /var/log/cinder/volume.log: > 2017-06-19 16:54:45.056 9797 INFO cinder.volume.manager > [req-e556d559-c484-4edf-a458-5afbafcb8e39 - - - - -] Initializing RPC > dependent components of volume driver RBDDriver (1.2.0) > 2017-06-19 16:54:45.056 9797 ERROR cinder.utils > [req-e556d559-c484-4edf-a458-5afbafcb8e39 - - - - -] Volume driver RBDDriver > not initialized > 2017-06-19 16:54:45.057 9797 ERROR cinder.volume.manager > [req-e556d559-c484-4edf-a458-5afbafcb8e39 - - - - -] Cannot complete RPC > initialization because driver isn't initialized properly. > 2017-06-19 16:54:55.063 9797 ERROR cinder.service [-] Manager for service > cinder-volume controller.trilliams.info@ceph is reporting problems, not > sending heartbeat. Service will appear "down". > 2017-06-19 16:56:34.065 9797 WARNING cinder.volume.manager > [req-1309a49a-d5c9-45dd-b277-36cb4ac09dd8 - - - - -] Update driver status > failed: (config name ceph) is uninitialized. > > I’ve added the entirety of /etc/cinder/cinder.conf to my gist, & thank you > all for any help you can provide. > > > T. Nichole Williams > tribe...@tribecc.us > > > > On Jun 19, 2017, at 4:39 PM, Marko Sluga <ma...@markocloud.com> wrote: > > Hi Nicole, > > I can help, I have been working on my own openstack connected to ceph - can > you send over the config in your /etc/cinder/cinder.conf file - especially > the rbd relevant section starting with: > > volume_driver = cinder.volume.drivers.rbd.RBDDriver > > Also, make sure your rbd_secret_uuid matches the client volume secret you > created. > > Regards, > > Marko Sluga > Independent Trainer > > <1487020143233.jpg> > > W: http://markocloud.com > T: +1 (647) 546-4365 > > L + M Consulting Inc. > Ste 212, 2121 Lake Shore Blvd W > M8E 4E9, Etobicoke, ON > > > ---- On Mon, 19 Jun 2017 17:25:59 -0400 T. Nichole Williams > <tribe...@tribecc.us> wrote ---- > > Hello, > > I’m having trouble connecting Ceph to OpenStack Cinder following the guide in > docs.ceph.com & I can’t figure out what’s wrong. I’ve confirmed auth > connectivity for both root & ceph users on my openstack controller node, but > the RBDDriver is not initializing. I’ve dug through every related Google > article I can find with no results. Any one have any tips? > > Here’s output of a few sample errors, auth list from controller, & > cinder-manage config list. Please let me know if you need any further info > from my side. > https://gist.githubusercontent.com/OGtrilliams/ed7642358a113ab7d908f4240427ad2e/raw/282de9ce1756670fe8c3071d1613e3c64d6e5b2f/cinder-conf > > T. Nichole Williams > tribe...@tribecc.us > > > > _______________________________________________ > ceph-users mailing list > ceph-users@lists.ceph.com > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > >
_______________________________________________ ceph-users mailing list ceph-users@lists.ceph.com http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com