One trick we used to use in similar situations was to borrow a second
processor and install the multi-processor version of NT, then remove the
second processor. Multi-processor NT will operate ok (possibly there are
performance penalties - I never tried to find out) with only one processor
installed. When you get processor two, install it and restart and you're
done.
-----Original Message-----
From: Craig Harcombe [mailto:[EMAIL PROTECTED]]
Sent: Thursday, February 15, 2001 3:03 PM
To: CF-Server
Subject: Re: Adding CPU after CF Server installation
Hi All,
For what it's worth, UPTOMP.EXE is an option but nine times out of ten (at
least for us) it leads to a screaming blue screen and the need to rebuild
anyway. Don't waste your time with it..
Craig
----- Original Message -----
From: "David Effa" <[EMAIL PROTECTED]>
To: "CF-Server" <[EMAIL PROTECTED]>
Sent: Friday, February 16, 2001 2:18 AM
Subject: RE: Adding CPU after CF Server installation
> This is not true. There is an utility on the NT 4 Resource Kit called
> UPTOMP.EXE that upgrades the O/S files and the HAL to support a
> Multiprocessor configuration. If you wish to do this manually, look at
this
> article: http://support.microsoft.com/support/kb/articles/Q156/3/58.asp
>
> Cheers,
>
> David Effa
>
>
>
>
> [EMAIL PROTECTED]
> 02/14/2001 07:38 PM
> Please respond to cf-server
>
> To: [EMAIL PROTECTED]
> cc:
> Subject: RE: Adding CPU after CF Server installation
>
> If you have installed NT Server 4.0 on a single CPU machine, adding a
second
> CPU will DEFINATELY require a complete rebuild.
>
> Tony Gruen
>
> -----Original Message-----
> From: Percy E Perez [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, February 14, 2001 12:00 PM
> To: CF-Server
> Subject: Adding CPU after CF Server installation
>
>
> Hello all,
>
> I have an nt server one way. I am planning on installing CF Server Pro..,
> however if I install it right now, would it present a problem when I add
the
> second CPU? any reconfiguration issues?
>
> Unfortunately the Second CPU is not available until the end of the month,
> and I would like to start working on the server.
>
> Thank you for your assistance.
>
> Percy E Perez
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Structure your ColdFusion code with Fusebox. Get the official book at
http://www.fusionauthority.com/bkinfo.cfm
------------------------------------------------------------------------------
To unsubscribe, send a message to [EMAIL PROTECTED] with
'unsubscribe' in the body or visit the list page at www.houseoffusion.com
