Here's my recommendation!
Don't do it!!!
You would be well advised to install your second processor and do a clean
installation of the operating system.
The documentation on UPTOMP.exe is less than adaquate. If you get the wrong
settings with UPTOMP.exe then you are going to have to re-install the OS
anyway.
As far as I'm aware CF doesn't really have any issue with you having 1,2 or
20(he exagerates) processors, but NT will not make the second processor
available if the single processor kernel is installed and if you install the
wrong MP kernel it will blue screen on start-up.
If the server is not to go live for some time and you need to get working on
the server, then perhaps you could use this time before the second processor
is available to tinker with the set up of NT/IIS/CF etc. and then use the
arrival of the 2nd processor to flatten your machine and set it up cleanly
after a month of tinkering.. ;o)
Regards
Stephen
> -----Original Message-----
> From: Percy E Perez [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, 14 February 2001 20:00
> To: CF-Server
> Subject: Adding CPU after CF Server installation
>
>
> Hello all,
>
> I have an nt server one way. I am planning on installing CF Server Pro.,
> however if I install it right now, would it present a problem
> when I add the
> second CPU? any reconfiguration issues?
>
> Unfortunately the Second CPU is not available until the end of the month,
> and I would like to start working on the server.
>
> Thank you for your assistance.
>
> Percy E Perez
>
>
>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Structure your ColdFusion code with Fusebox. Get the official book at
http://www.fusionauthority.com/bkinfo.cfm
------------------------------------------------------------------------------
To unsubscribe, send a message to [EMAIL PROTECTED] with
'unsubscribe' in the body or visit the list page at www.houseoffusion.com
