Well thanks for that Andrew - it means that it IS POSSIBLE that at the end
of this saga that's now been going for more than 2 months, I might have a
Studio that works. it **IS** possible the thing is going to be usable.
It's running in Windows98 64MB and I've tried it in Windows95/48MB
But on the plus side, I'm pleased to report that after all this time
Allaire's support has finally woken up and offered a suggestion. Perhaps
I have two web servers running. (I don't). Not much progress, but it
**IS** progress.
Andrew thanks for your suggestion and for giving me the confidence to
continue. I was starting to think I'm better just to cut my losses, throw
a A$1000 program away and suggest my clients buy another program. I was
not looking forward to telling them they have to throw out that amount of
money.
Cheers,
Mike Kear
AFP Web Development
Webmaster, Australian Consumers Association
Windsor, NSW, Australia
On Sun, 18 Jun 2000, Andrew Scott wrote:
> It appears you are running this under windows NT or Windows 2000, I am
> running CF Studio 4.5.1 and also bet tested it through its beta stages. I
> have never seen this error in doing all the installations of the betas.
> However, if its running under NT or Windows 2000 you will find that some
> rouge software you have installed might actually be the problem.
>
> I have used all the features you are having problems with, all with 100%
> succes in the use of it.
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
> Behalf Of Michael Kear
> Sent: Thursday, 8 June 2000 12:34 AM
> To: [EMAIL PROTECTED]
> Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
> Subject: Re: studio errors
>
>
> This happens to me too. Allaire haven't shown the slightest interest in
> helping me with it either, no matter how I report it.
>
> Basically, I think they've created something and don't have a clue how to
> make it work. It costs more than A$1000. I also bought a 2 year
> subscription and after 3 months I haven't been able to make it produce a
> single template. I'm still using the old version. For such an expensive
> package, it doesnt do even the most basic things properly, and isn't up to
> the standard of a year 1 programmer's effort.
>
> THe only suggestion I've been able to squeeze out of their support is that
> there's a bug in the deployment wizard and you have to make sure you
> upload the entire project not the changed files.
>
> Big deal. IT still won't install properly and it still gives those
> exception errors.
>
> I believe it fails the test under the Sale of Goods ACt that it be of
> merchantable quality, and therefore I have an action against them in the
> courts. If there's no sign of interest by Allaire or their distributor,
> Firmware eDesign soon, I'm going to be taking them to court over it.
>
> My advice is, don't touch Studio 4.5.1 with a barge pole unless you don't
> mind never using for anything other than a text editor.
>
> Pity, cos the demo (obviously a big fraud because it worked) looked pretty
> good.
>
> If I ever hear of a fix for my problems, I'll be sure to let you all know.
>
> Cheers,
> AFP Web Development
> Windsor, NSW< Australia
> http://www.afp.zip.com.au
>
>
>
> On Sun, 4 Jun 2000, Greg Saunders wrote:
>
> > I'm running Studio 4.5.1, and seeing lots of exception errors. I reboot
> my
> > machine, start Studio, and then quit, and I get:
> >
> > Application Error: Exception EAccessViolation in module
> > cfstudio45.exe at address 004F9614 in module 'cfstudio45.exe'.
> > Read of address 01ADC064.
> >
> > This happens repeatedly when I quit. It did not happen when I first
> > installed 4.5, but it seems suddenly frequent, and I'm not sure what
> changed.
> >
> > Also, occasionally when I save a file, the file is saved, but the file tab
> > still shows the file as unsaved, and I occasionally also get exception
> > errors while editing.
> >
> > Any ideas what would cause this? Should I reinstall? Originally I was
> > running 4.0, then I installed a 4.5 upgrade, and finally I installed the
> > 4.5.1 upgrade. If I reinstall, do I need to follow these steps again, or
> > is the 4.5.1 upgrade a complete version?
> >
> > Gregory M. Saunders, Ph.D.
> > Senior Design Architect
> > Cognitive Arts Corporation (http://www.cognitivearts.com)
> > 1840 Oak Avenue, 4th Floor
> > Evanston, IL 60201-5914
> >
> > --------------------------------------------------------------------------
> ----
> > Archives: http://www.eGroups.com/list/cf-talk
> > To Unsubscribe visit
> http://www.houseoffusion.com/index.cfm?sidebar=lists&body=lists/cf_talk or
> send a message to [EMAIL PROTECTED] with 'unsubscribe' in
> the body.
> >
> > --------------------------------------------------------------------------
> ----
> > Archives: http://www.eGroups.com/list/cf-talk
> > To Unsubscribe visit
> http://www.houseoffusion.com/index.cfm?sidebar=lists&body=lists/cf_talk or
> send a message to [EMAIL PROTECTED] with 'unsubscribe' in
> the body.
> >
> > --------------------------------------------------------------------------
> ----
> > Archives: http://www.eGroups.com/list/cf-talk
> > To Unsubscribe visit
> http://www.houseoffusion.com/index.cfm?sidebar=lists&body=lists/cf_talk or
> send a message to [EMAIL PROTECTED] with 'unsubscribe' in
> the body.
> >
>
> ----------------------------------------------------------------------------
> --
> Archives: http://www.eGroups.com/list/cf-talk
> To Unsubscribe visit
> http://www.houseoffusion.com/index.cfm?sidebar=lists&body=lists/cf_talk or
> send a message to [EMAIL PROTECTED] with 'unsubscribe' in
> the body.
>
> ----------------------------------------------------------------------------
> --
> Archives: http://www.eGroups.com/list/cf-talk
> To Unsubscribe visit
> http://www.houseoffusion.com/index.cfm?sidebar=lists&body=lists/cf_talk or
> send a message to [EMAIL PROTECTED] with 'unsubscribe' in
> the body.
>
> ------------------------------------------------------------------------------
> Archives: http://www.eGroups.com/list/cf-talk
> To Unsubscribe visit
>http://www.houseoffusion.com/index.cfm?sidebar=lists&body=lists/cf_talk or send a
>message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
>
------------------------------------------------------------------------------
Archives: http://www.eGroups.com/list/cf-talk
To Unsubscribe visit
http://www.houseoffusion.com/index.cfm?sidebar=lists&body=lists/cf_talk or send a
message to [EMAIL PROTECTED] with 'unsubscribe' in the body.
