Do you have the driver disk (probably a floppy) that came with the
Adaptec card? I am thinking that you will need to specify an additional
driver for the Adaptec card when you do the windows 2000 install. (Hit
F6 during the install when it tells you to.)
I seem to remember a server of mine momentary, when doing an install,
flashing to a BSOD (Blue Screen Of Death), then rebooting, if I did not
load the driver for my Adaptec card.
Mark W. Breneman
-Cold Fusion Developer
-Network Administrator
Vivid Media
[EMAIL PROTECTED]
www.vividmedia.com
608.270.9770
-----Original Message-----
From: Robert Orlini [mailto:[EMAIL PROTECTED]
Sent: Wednesday, November 12, 2003 3:03 PM
To: CF-Talk
Subject: OT - Scsi hd
Sorry this is OT, but it's only one of the few times I've asked.
I need to upgrade my server running CF. I have SCSI HD's and an Adaptec
Array adapter. I installed the new HD and then one of the older larger
HD's which I will put the OS (windows 200) on it. I setup the cd-rom as
the boot and put the 2000 cd in it. However, the system boots,
recognizes the HDs, the light comes on the cd but it then reboots and
does not start the Server 2000 setup.
Did I explain enough or is there more to this than meets the eye?
Thanks as always and excuse the OT on this please.
Robert Orlini
HW Wilson
718-588-8400 x2656
ô¿ô
_____
[Todays Threads] [This Message] [Subscription] [Fast Unsubscribe] [User Settings]
