Dave What exactly is the wsconfig.exe utility?
Thanks -----Original Message----- From: Dave Watts [mailto:[EMAIL PROTECTED]] Sent: 06 June 2002 19:26 To: CF-Talk Subject: RE: CFMX and .NET on the same computer? > Thanks for the heads up. I'll be installing on Win2K Pro, > but will likely see similar problems. Maybe .Net needs to > be installed first? or Last? I've seen the order apps are > installed affect performance before..... we'll see. But to > be on the safe side, I'll be Ghosting my installation to > another hard drive before I do this... I didn't have any real problems with either install, but I didn't install CF MX to use IIS, either. I set that up manually afterwards, and I'd recommend that approach for a development machine, since it gives you greater control over the final result. So, to sum up, I did this: 1. On Win2K, I installed CF 5. 2. Then, VS.NET and the .NET Framework. 3. Then, CF MX in standalone mode. 4. I created a separate virtual server in IIS for CF MX. 5. I ran the wsconfig.exe utility in \CfusionMX\runtime\bin to set up a connector between CF MX and the specific IIS virtual server from (4). On the other hand, you should be able to install CF MX, then .NET. The only issue I can think of is if both are configured to use the same IIS virtual server. Even that might work, for all I know. Dave Watts, CTO, Fig Leaf Software http://www.figleaf.com/ voice: (202) 797-5496 fax: (202) 797-5444 ______________________________________________________________________ Get the mailserver that powers this list at http://www.coolfusion.com FAQ: http://www.thenetprofits.co.uk/coldfusion/faq Archives: http://www.mail-archive.com/cf-talk@houseoffusion.com/ Unsubscribe: http://www.houseoffusion.com/index.cfm?sidebar=lists
