================
@@ -439,82 +444,194 @@
CGRecordLowering::accumulateBitFields(RecordDecl::field_iterator Field,
Members.push_back(MemberInfo(bitsToCharUnits(StartBitOffset),
MemberInfo::Field, nullptr, *Field));
}
- return;
+ return Field;
}
- // Check if OffsetInRecord (the size in bits of the current run) is better
- // as a single field run. When OffsetInRecord has legal integer width, and
- // its bitfield offset is naturally aligned, it is better to make the
- // bitfield a separate storage component so as it can be accessed directly
- // with lower cost.
- auto IsBetterAsSingleFieldRun = [&](uint64_t OffsetInRecord,
- uint64_t StartBitOffset) {
- if (!Types.getCodeGenOpts().FineGrainedBitfieldAccesses)
- return false;
- if (OffsetInRecord < 8 || !llvm::isPowerOf2_64(OffsetInRecord) ||
- !DataLayout.fitsInLegalInteger(OffsetInRecord))
- return false;
- // Make sure StartBitOffset is naturally aligned if it is treated as an
- // IType integer.
- if (StartBitOffset %
- Context.toBits(getAlignment(getIntNType(OffsetInRecord))) !=
- 0)
- return false;
- return true;
- };
+ // The SysV ABI can overlap bitfield storage units with both other bitfield
+ // storage units /and/ other non-bitfield data members. Accessing a sequence
+ // of bitfields mustn't interfere with adjacent non-bitfields -- they're
+ // permitted to be accessed in separate threads for instance.
+
+ // We split runs of bit-fields into a sequence of "access units". When we
emit
+ // a load or store of a bit-field, we'll load/store the entire containing
+ // access unit. As mentioned, the standard requires that these loads and
+ // stores must not interfere with accesses to other memory locations, and it
+ // defines the bit-field's memory location as the current run of
+ // non-zero-width bit-fields. So an access unit must never overlap with
+ // non-bit-field storage or cross a zero-width bit-field. Otherwise, we're
+ // free to draw the lines as we see fit.
+
+ // Drawing these lines well can be complicated. LLVM generally can't modify a
+ // program to access memory that it didn't before, so using very narrow
access
+ // units can prevent the compiler from using optimal access patterns. For
+ // example, suppose a run of bit-fields occupies four bytes in a struct. If
we
+ // split that into four 1-byte access units, then a sequence of assignments
+ // that doesn't touch all four bytes may have to be emitted with multiple
+ // 8-bit stores instead of a single 32-bit store. On the other hand, if we
use
+ // very wide access units, we may find ourselves emitting accesses to
+ // bit-fields we didn't really need to touch, just because LLVM was unable to
+ // clean up after us.
+
+ // It is desirable to have access units be aligned powers of 2 no larger than
+ // a register. (On non-strict alignment ISAs, the alignment requirement can
be
+ // dropped.) A three byte access unit will be accessed using 2-byte and
1-byte
+ // accesses and bit manipulation. If no bitfield straddles across the two
+ // separate accesses, it is better to have separate 2-byte and 1-byte access
+ // units, as then LLVM will not generate unnecessary memory accesses, or bit
+ // manipulation. Similarly, on a strict-alignment architecture, it is better
+ // to keep access-units naturally aligned, to avoid similar bit
+ // manipulation synthesizing larger unaligned accesses.
+
+ // We do this in two phases, processing a sequential run of bitfield
+ // declarations.
+
+ // a) Bitfields that share parts of a single byte are, of necessity, placed
in
+ // the same access unit. That unit will encompass a consecutive
+ // run where adjacent bitfields share parts of a byte. (The first bitfield of
+ // such an access unit will start at the beginning of a byte.)
+
+ // b) Accumulate adjacent access units when the combined unit is naturally
+ // sized, no larger than a register, and on a strict alignment ISA,
+ // aligned. Note that this requires lookahead to one or more subsequent
access
+ // units. For instance, consider a 2-byte access-unit followed by 2 1-byte
+ // units. We can merge that into a 4-byte access-unit, but we would not want
+ // to merge a 2-byte followed by a single 1-byte (and no available tail
+ // padding).
+
+ // This accumulation is prevented when:
+ // *) it would cross a zero-width bitfield (ABI-dependent), or
+ // *) one of the candidate access units contains a volatile bitfield, or
+ // *) fine-grained bitfield access option is in effect.
+
+ CharUnits RegSize =
+ bitsToCharUnits(Context.getTargetInfo().getRegisterWidth());
+ unsigned CharBits = Context.getCharWidth();
+
+ RecordDecl::field_iterator Begin = FieldEnd;
+ CharUnits StartOffset;
+ uint64_t BitSize;
+ CharUnits BestEndOffset;
+ RecordDecl::field_iterator BestEnd = Begin;
+ bool Volatile;
- // The start field is better as a single field run.
- bool StartFieldAsSingleRun = false;
for (;;) {
- // Check to see if we need to start a new run.
- if (Run == FieldEnd) {
- // If we're out of fields, return.
- if (Field == FieldEnd)
- break;
- // Any non-zero-length bitfield can start a new run.
- if (!Field->isZeroLengthBitField(Context)) {
- Run = Field;
- StartBitOffset = getFieldBitOffset(*Field);
- Tail = StartBitOffset + Field->getBitWidthValue(Context);
- StartFieldAsSingleRun = IsBetterAsSingleFieldRun(Tail - StartBitOffset,
- StartBitOffset);
+ CharUnits Limit;
+ bool Barrier;
+ bool Install = false;
+
+ if (Field != FieldEnd && Field->isBitField()) {
+ uint64_t BitOffset = getFieldBitOffset(*Field);
+ if (Begin == FieldEnd) {
+ // Beginning a new access unit.
+ Begin = Field;
+ BestEnd = Begin;
+
+ assert(!(BitOffset % CharBits) && "Not at start of char");
+ StartOffset = bitsToCharUnits(BitOffset);
+ BitSize = 0;
+ Volatile = false;
+ } else if (BitOffset % CharBits) {
+ // Bitfield occupies the same char as previous.
+ assert(BitOffset == Context.toBits(StartOffset) + BitSize &&
+ "Concatenating non-contiguous bitfields");
+ } else {
+ // Bitfield begins a new access unit.
+ Limit = bitsToCharUnits(BitOffset);
+ Barrier = false;
+ if (Field->isZeroLengthBitField(Context) &&
+ (Context.getTargetInfo().useZeroLengthBitfieldAlignment() ||
+ Context.getTargetInfo().useBitFieldTypeAlignment()))
+ Barrier = true;
+ Install = true;
}
- ++Field;
- continue;
+ } else if (Begin == FieldEnd) {
+ // Completed the bitfields.
+ break;
+ } else {
+ // End of the bitfield span, with active access unit.
----------------
rjmccall wrote:
```suggestion
// We've reached the end of the bitfield span, and we have an active
// access unit. Determine the upper limit of that access unit: the
// offset of the next field, if there is one, or otherwise the end of the
// record.
```
https://github.com/llvm/llvm-project/pull/65742
_______________________________________________
cfe-commits mailing list
cfe-commits@lists.llvm.org
https://lists.llvm.org/cgi-bin/mailman/listinfo/cfe-commits
