I've always run electric fuel pumps and simply put a toggle switch in line with the hot lead.  It's saved one car.  Driver got about 2 blocks before it ran out of gas and he/she abandoned it.  Personally, I'd hesitate to put any switch that simply cuts off electricity; it may pi$$ them off and they tear something else up trying to get it started.  Of course it depends if it's a professional thief or a joy rider.
 
Cute/sad story:  A guy was at some event and took the rotor out of his distributor to foil thieves.  Returns after event - car gone.  While reporting it to the police, another guy shows up to complain that someone stole the rotor out of his distributor!  Can't win.

Dale McIntosh
ACES #1709/TC #92 Gold
67 SS/67 Elky
http://www.dalesplace.com

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Keith Cooper
Sent: Tuesday, December 11, 2001 6:11 PM
To: [EMAIL PROTECTED]
Subject: [Chevelle-List] Kill Switch

If you put a kill switch on a car, what would you kill??
You could kill the starter wire.
You could kill the coil wire.
You could kill the wires at the neutral safety switch on the steering column or an ignition wire.
Should you kill a wire in the engine compartment or inside the car.  If you kill the starter wire,the wire is already a 10 or 12 gauge wire, would you have to go to a 10 or 8 gauge wire to prevent problem because of the length you would add??
The same for the positive coil wire, would you run into problems because of the extra length you added for the kill switch?
I am going to put a kill switch on, but I have been thinking about problems I could have. I will then have to decide where to put a switch so it is not easy to find, but easy to use.
Any input??? I know that the subject has been talked about before, but I never seen anyone talk about problems because of length and wire size.
 
See my Chevelle:

Reply via email to