----- Original Message -----
Sent: Wednesday, December 12, 2001
12:37 AM
Subject: RE: [Chevelle-List] Kill
Switch
I've always run electric fuel pumps and simply
put a toggle switch in line with the hot lead. It's saved one
car. Driver got about 2 blocks before it ran out of gas and he/she
abandoned it. Personally, I'd hesitate to put any switch that simply
cuts off electricity; it may pi$$ them off and they tear something else up
trying to get it started. Of course it depends if it's a
professional thief or a joy rider.
Cute/sad story: A guy was at some event and
took the rotor out of his distributor to foil thieves. Returns after
event - car gone. While reporting it to the police, another guy
shows up to complain that someone stole the rotor out of his
distributor! Can't win.
If you put a kill switch on a car, what
would you kill??
You could kill the starter
wire.
You could kill the coil wire.
You could kill the wires at the neutral
safety switch on the steering column or an ignition wire.
Should you kill a wire in the engine
compartment or inside the car. If you kill the starter wire,the
wire is already a 10 or 12 gauge wire, would you have to go to a 10 or 8
gauge wire to prevent problem because of the length you would
add??
The same for the positive coil wire, would
you run into problems because of the extra length you added for the kill
switch?
I am going to put a kill switch on, but I
have been thinking about problems I could have. I will then have to
decide where to put a switch so it is not easy to find, but easy to
use.
Any input??? I know that the subject has
been talked about before, but I never seen anyone talk about problems
because of length and wire size.
See my Chevelle: