Replies to this message are sent to The Chevelle Mailing List ------------------------------------------------------------
What's the nature of the fouling? Oily black, fluffy black, etc. Does your coolant look clean? Is this a stock engine with high miles? Has coolant and/or oil usage changed since you replaced the head gaskets? Brad O. > Lately, the end of summer(PA), I have just replaced the head gaskets, on my > 75' 350 because the head gasket blew at the #2 cylinder, short after that > the car was overheated to 280 degress +, the oil has no water in it, there > car gives off no "smelly" smoke, but the #2 spark plug fouled out, i am > runnning ac delco 44t with a accel supercoil, and accel wires, I was just > wondering if this has happened to anyone else with this engine and what to > do to cure this problem. A am guessing that the head is warped at the #2 > cylinder, or even bettter, that it has a hairline crack there. I would > very much be pleased for any comments on my situation, thanks greatly. > ---Dan > 1975 Chevelle Malibu Classic 4bbl(holley 600), restored(minuspaint) ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
