What about sandblasted
surfaces? JOE BANKS AZTECH
MOLD & DIE STEEL 602-257-2300 -----Original
Message----- Just keep in
mind the POR15 needs to be applied to bare metal. You won't gain much by
painting over anything else. The POR15 actually bonds to the metal, and
it does seem to like some surface rust.
Thanks for the information. My undercarriage isn't a rust
bucket by any means, just the usual surface rust. Sounds like I
won't have to do alot of sanding like I thought. I have a new
gallon jug of simple green. Think I'll' spray it on and then use a
pressure washer to remove the grease and oil. Put on the POR-15 and then
paint it. Just
picked up my two new steel wheel wells. Had them painted gloss
black. $100 for both. He did the whole wheel well great job.
Thanks again guys. I appreciate the help. Craig
At 08:11 AM
02/08/2002, you wrote: I'm thinking of coating the undercarriage of the car with POR
15. I notice that they have a degreaser cleaner, neutralizer, etc.
Does anyone know how necessary it is to use these other items, can they be
replaced with anything else or will the POR-15 work with out them if I clean
the undercarriage. Thanks
Kelly C. Hanna
-- -- Check out my webpage at http://www.ProStreetCar.com and my For Sale page at http://www.ProStreetCar.com/classifieds.html Tremec Distributor at http://www.tremectransmissions.com/ Team Chevelle membership #178 (Gold) |
- [Chevelle-List] POR-15 Craig & Cerena Robertson
- Re: [Chevelle-List] POR-15 Kelly C. Hanna
- Re: [Chevelle-List] POR-15 Craig & Cerena Robertson
- Re: [Chevelle-List] POR-15 Michael Pell
- Re: [Chevelle-List] POR-15 aztechsteel
- Re: [Chevelle-List] POR-15 denshew
- RE: [Chevelle-List] POR-15 wbainey
- Re: [Chevelle-List] POR-15 richard a schaefer
- RE: [Chevelle-List] POR-15 denshew
- Re: [Chevelle-List] POR-15 JeffK
- Re: [Chevelle-List] POR-15 HarKemAsso
- RE: [Chevelle-List] POR-15 aztechsteel
- Re: [Chevelle-List] POR-15 Bill Vander Werf