Someone wrote asking about a downshift
problem. I accidentally erased it. Can you post the
question again? Also to Bill V
(I'm stumped) Doug is correct about the toque
converter not seating. On the old 400's we sometimes had to hit the converter
with a rubber mallet to get it to seat. Most of the time they fall in but the
trans is in the up position and the converter is looking at the ceiling. Putting
it in on a garage floor you have to be more careful. But you can still seat it
with a mallet if it's stubborn.
Rich
|
- Re: [Chevelle-List] No 3 - 2 downshift Richard Milkiewicz
- Re: [Chevelle-List] No 3 - 2 downshift Kelly C. Hanna
- Re: [Chevelle-List] No 3 - 2 downshift Richard Milkiewicz
- Re: [Chevelle-List] No 3 - 2 downshift Kelly C. Hanna
- Re: [Chevelle-List] No 3 - 2 downshift Richard Milkiewicz
- Re: [Chevelle-List] No 3 - 2 down... Kelly C. Hanna
- Re: [Chevelle-List] No 3 - 2 downshift Rob
- Re: [Chevelle-List] No 3 - 2 downshift DonnieG67
- Re: [Chevelle-List] No 3 - 2 downshift Kelly C. Hanna
- Re: [Chevelle-List] No 3 - 2 downshift Z16CHEVELLEGUY
- Re: [Chevelle-List] No 3 - 2 downshift WCross9844