It shouldn't be a problem, just cut the length to fit to your stock exhaust pipe. My point was that it's not a DIRECT REPLACEMENT all the way to the exhaust manifold AND you'll have to weld or band clamp the pipes together which I consider not a typical driveway installation like factory style exhaust.
Dale -----Original Message----- From: [EMAIL PROTECTED] [mailto:owner-chevelle-list@;chevelles.net] On Behalf Of John Nasta Sent: Thursday, November 07, 2002 5:03 PM To: [EMAIL PROTECTED] Subject: RE: [Chevelle-List] Flowmaster install Hmmm, Leo also mentioned headers. I don't have headers. Just stock x-mans. Is that going to be a problem? I guess I'll have to call Flowmaster again tomorrow and double-check. John Nasta -----Original Message----- I had an American Thunder exhaust system installed on my 67 and, while not a "bolt-on" job that can be done in the driveway easily, any competent muffler shop should be able to handle it. The kit assumes headers so you still have to weld up the pipes to the collector reducer. I have a short .WAV file at http://bull-enterprises.com/dalesplace/p0000852.wav if you'd like to hear it. Dale McIntosh ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
