If you look at the picture at http://www.tavia.com/cat12.html, you'll see two threaded bars - one for each thread size. You'll also see the large faced nut and "washer." Thread the correct size end into the crank snout and use the nut to draw the balancer onto the crank. The "washer" spreads the load out so it doesn't strip the threads in the crank.
Dale McIntosh TC Gold #92/ACES #1709 67SS/67 Elky Dale's Place Team 67 Midwest Chevelle Regionals -----Original Message----- From: [EMAIL PROTECTED] [mailto:owner-chevelle-list@;chevelles.net] On Behalf Of Gary Treible Sent: Sunday, November 10, 2002 8:09 PM To: [EMAIL PROTECTED] Subject: Re: [Chevelle-List] Harmonic Balancer Installation (part 2) How does the installation tool work? Gary ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]