Here's a good example for my restoration. Look at
the picture of the gas tank. Then look at the frame. http://www.worldwidemusclecars.com/EBAY/EBAYPICS/1/10.JPG It
looks like it was pitted from rust pretty bad. What's the solution if your
looking to have a frame powder coated not to have it look like that? What
fillers can be used under the powder coating? Is lead an option? If I'm going
that far I want it all to be as perdy as possible. 8)
JDHall
|
- [Chevelle-List] '70 Chevelle LS6 Don
- Re: [Chevelle-List] '70 Chevelle LS6 Michael Pell
- Re: [Chevelle-List] '70 Chevelle LS6 Michael Pell
- Re: [Chevelle-List] '70 Chevelle LS6 Tigergutt
- RE: [Chevelle-List] '70 Chevelle LS6 JDHall
- RE: [Chevelle-List] '70 Chevelle LS6 Dale McIntosh
- RE: [Chevelle-List] '70 Chevelle LS6 John W. Lonadier, Jr.
- Re: [Chevelle-List] '70 Chevelle LS6 Z16CHEVELLEGUY
- RE: [Chevelle-List] '70 Chevelle LS6 Dale McIntosh
- Re: [Chevelle-List] '70 Chevelle LS6 Z16CHEVELLEGUY
- RE: [Chevelle-List] '70 Chevelle LS6 Dale McIntosh
- RE: [Chevelle-List] '70 Chevelle LS6 Craig Ellis
- Re: [Chevelle-List] '70 Chevelle LS6 Z16CHEVELLEGUY
- Re: [Chevelle-List] '70 Chevelle LS6 WCross9844
- Re: [Chevelle-List] '70 Chevelle LS6 Z16CHEVELLEGUY