Pelle, The hose threads into the brass block. All are replacable. You will need to remove the steel line from the front end of the flexible line and pop the clip loose that holds the flex. line to the chassis. Then all should come out. Good luck. Mike Holleman ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "Chevelle Mailing List" <[EMAIL PROTECTED]> Sent: Wednesday, June 25, 2003 8:51 AM Subject: [Chevelle-List] Q: Brake line connection II
> There's a little brass connection on top of the rear axel that > connects the two brake lines going to the wheels! > There's also a short brake hose connected to the same little brass > block! My question is: > Is it possible to remove & replace that little brass connection from > all of the three above mentioned hoses & brakelines or is the hose > "fixed" to the brass connection? > My thought is to try to replace that little brass block so I can rid of > that stuck brakeline! > > Best regards > Pelle Andersson > > ********************************************** > Just on the border of your waking mind > There lies... Another time > Where darkness & light are one > And as you tread the halls of sanity > You feel so glad to be > Unable to go beyond > I have a message > From another time... > > ----------------------------------------------------- > To Unsubscribe please visit www.chevelles.net/list.html > To start a new topic, send mail to: [EMAIL PROTECTED] ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]
