Thanks! That's good news! I guess I'll just move forward towards the front in disassembling the brake lines until I get to a point where I can get everything loose for replacement!? When I was changing the front brake pads the other day I realized that I have to change the discs too, one of them looked like a washboard :-( But I'll sacrifice a set of brake pads so I can drive my car home to Stockholm a.s.a.p. from my parents house & do the disc change at the car-club in Stockholm when I eventually get there ;-)
Best regards Pelle ----- Original Message ----- From: "Mike Holleman" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, June 25, 2003 6:42 PM Subject: Re: [Chevelle-List] Q: Brake line connection II > Pelle, The hose threads into the brass block. All are replacable. You will > need to remove the steel line from the front end of the flexible line and > pop the clip loose that holds the flex. line to the chassis. Then all should > come out. > Good luck. > Mike Holleman ----------------------------------------------------- To Unsubscribe please visit www.chevelles.net/list.html To start a new topic, send mail to: [EMAIL PROTECTED]