It rubbed the steering on my '66. Not what I wanted to do, especially after all the cost and then efforts to get them in without scratching anything.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Richard M. Pruett Sent: Sunday, April 24, 2005 5:07 AM To: The Chevelle Mailing List Subject: Re: [Chevelle-list] Headers What year are you running your dimpled headers on? I have coated Hookers on my '69 396 with no dimples. The driver's side was no box of chocolates to install, I can tell you that. The only clearance issue I had was that the brake lines needed to be moved a 1/4" or so on the drivers side. Rich ----- Original Message ----- From: "Ron Sparks" <[EMAIL PROTECTED]> To: "'The Chevelle Mailing List'" <Chevelle-list@chevelles.net> Sent: Saturday, April 23, 2005 7:39 PM Subject: RE: [Chevelle-list] Headers > About two years, so that probably not long enough to tell anytihng (not > like > I run around in a weather much with it).. But I bought them from a guy > that > dig the ceramic coating, so Hooker did not coat them. They look like they > will hold up fine, but time will tell. > > Oh, one thing on fit for my car - I also had to dimple one tube for > steering > clearance. > > > Ron > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Dan Mascheck > Sent: Saturday, April 23, 2005 2:36 PM > To: 'The Chevelle Mailing List' > Subject: RE: [Chevelle-list] Headers > > Ron, > > How long have you had the ceramic Hookers? Any rust yet?? It surprised me > when the Hooker Rep told they would rust! I'm sure under very adverse > conditions...but he told me up front!! > > Dan > > -----Original Message----- > From: Ron Sparks [mailto:[EMAIL PROTECTED] > Sent: Saturday, April 23, 2005 10:49 AM > To: 'The Chevelle Mailing List' > Subject: RE: [Chevelle-list] Headers > > I've got coated Hookers on my 454 in the '66 and am fairly happy with > them. > I do think they hang a little low, but I have never dragged them, so I'm > probably ok. Putting some Hotchkis springs up front today and I'm going to > take some careful measurements.... > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Dan Mascheck > Sent: Thursday, April 21, 2005 6:30 PM > To: Chevelle-list@chevelles.net > Subject: [Chevelle-list] Headers > > I'm getting ready to buy new headers for my 72 Chevelle SS. I'm running a > 454 with 8-71 blower. What do you > recommend...Hedman....Hooker...Dynamax???? > I will get ceramic coated. > > Dan > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of > [EMAIL PROTECTED] > Sent: Thursday, April 21, 2005 4:24 PM > To: Chevelle-list@chevelles.net > Subject: Chevelle-list Digest, Vol 21, Issue 50 > > Send Chevelle-list mailing list submissions to > Chevelle-list@chevelles.net > > To subscribe or unsubscribe via the World Wide Web, visit > http://chevelles.net/mailman/listinfo/chevelle-list_chevelles.net > or, via email, send a message with subject or body 'help' to > [EMAIL PROTECTED] > > You can reach the person managing the list at > [EMAIL PROTECTED] > > When replying, please edit your Subject line so it is more specific than > "Re: Contents of Chevelle-list digest..." > > > > > > > > > >
