|
That
would be grat, thanks!
its a 68 Chevelle, but its full custom with a corvette front
suspension, but I do think normal chevelle headers would
fit.
I'll
email you some pics off list
Have Fun
André
What year car do you need them for,Andre? I'll
talk to Al and see what I can do.
----- Original Message -----
Hi
again,
I
really wanted something bigger but Scott there answered that they wouldnt
offer anything else than 1 5/8"
I
totally agree that 1 5/8" are right for a 350, but my later
plans include a much bigger sbc (434 or 454cid) so if they offered 1
7/8" I'd go for that right away to avoid buying another set a a later time
even if that would cost some tq right now.
Maybe Al offered to build a set for you
because you know him ??
Se below for the Q's
&A's:
1 Do you have any small
block Chevelle headers with bigger primary tubes than 1 5/8"? SORRY THE 1.625” PRIMARIES ARE ALL WE
HAVE TO OFFER.
2 Do you offer any other
style of flange style than the leakprone 3bolt style (slip-on style with
band clamp or something like Burns v-band)? SLIP-FIT STYLE IS
AVAILABLE.
3 Do you supply
the cones with flanges that are to be welded to the exhaust
system toghether with the headers? NO
4 How thick are the flanges
that are to be mounted on the engine? 0.375”
THICK
5 If I were to upgrade the
headers to 18deg heads at a later time could I just change the engine
flanges or would I need a complete new header? YOU WOULD HAVE TO MAKE THAT CALL, WE COULD SUPPLY YOU
WITH THE FLANGES WHEN THEN TIME
COMES.
6 Do the headers have equal
lenght primary tubes? NO THEY ARE
NOT EQUAL LENGTH, SEE ATTACHED
PICTURE.
thanks!
Have
Fun
André
Stainless Works will build their headers with
1 5/8", 1 3/4", or 1 7/8" primaries. 1 5/8" tubes would be my preference
for my 350.
Talk to Al Noe,the owner.
----- Original Message -----
Hi Clint,
looks like they are fine, I asked some questians and even if they
are only 1 5/8" they sound really nice.
they are not that expensive either, around
$600
Have
Fun
André
Hooker also builds some of their headers
now in stainless. If I ever switch to stainless headers,Stainless
Works will be the ones I use.
----- Original Message -----
Hi all,
have anyone tried headers from stainless works? I know Clint
proposed them a while back but I have no more than
that.
any other brand of stainless small block headers to
consider??
thanks !
Have
Fun
André
|
