This is an excellent explaination of how to shim a starter IF that is your problem. And even if it isn't the problem now, your starter will last longer if it is shimmed correctly.
http://macc.chevelles.net/starter.htm
http://macc.chevelles.net/starter.htm
On 2/23/06, vin <[EMAIL PROTECTED]> wrote:
you probably put the little wire on the solenoid on the wrong one it goes on the s----- Original Message -----From: Eddie BumgarnerSent: Wednesday, February 22, 2006 7:28 PMSubject: Re: [Chevelle-list] starter problems
Hello my name is Eddie and welcome to the club. Im restoring a 66SS convertable (frame off) also, I love these cars.Now about the starter problem it could be one of a many things.I think a process of elemination would be good. First check to see if you have two wires melted together under the hood then under the dash next check your key switch. good luck! Eddie
Justin and Belinda Tyree <[EMAIL PROTECTED]> wrote:Hello all. I'm new to the list and I have a problem. I recently changed my
starter and everything was fine. Yesterday I went to start the car and the
starter engaged but would not disengage. I had to get out of the car and
disconnect the battery. ??Solinoid?? The wiring is butchered and I ordered
new wiring thru Year One, but it's never done this before and the starter
worked fine after I installed it.
thanks
judd
Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, & more on new and used cars.
--
Rick Schaefer
72 TPI El Camino
