Dave, The 700r4 does not use a kickdown cable. The cable is a TV cable, throttle valve. You need to get the right brackets and make sure it is adjusted correctly or your 700r4 will die a quick death. The 700 is not computor controlled. The one wire needed would be for the lockup converter if you are using one and the trans will have to have the internal solenoid installed to control this if used. One of the best ways to switch this is by changing your brake light switch to one for use with cruise control. It has two functions, one normally open, one normally closed. Get a little professional help on this conversion and you will be very happy with the OD trans. Mike ----- Original Message ----- From: Dave Benjamin To: chevelle-list@chevelles.net Sent: Friday, May 02, 2008 9:21 PM Subject: [Chevelle-list] Another Question HELP PLEASE!
Got my Beaumont out of storage and drove it last weekend. I got a new job that is a 25 min. drive back and forth and will be putting on lots of miles. I am putting a 700 R4 ( gas price ) in and was wondering if any one has wiring diagrams for it or any one has done this and What will I run into. I already made new drive shaft, have new throttle bracket for kick down cable. Also bought speedometer piece that will take a cable. Was also wondering what kind of gear I will have in first with 336 and 15" tires? Any Help very much appreciated. Thank you Dave Ingersoll,Ontario My Web Site: http://members.tripod.com/benj30/ ------------------------------------------------------------------------------ No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.23.7/1411 - Release Date: 5/2/2008 8:02 AM
