Having not disassembled the column I am making some uninformed assumptions. Is the turn signal cam the upper bearing also?

Larry

Dan Rachlin wrote:
I thought the bearing inside the turn signal was a part of the turn signal mech.? Can you get just the bearing?
Dan

On Sat, Mar 13, 2010 at 9:26 AM, Larry Williams <larrydwilli...@hughes.net <mailto:larrydwilli...@hughes.net>> wrote:

    Thanks.  Where did you get the top bearing by the turn signal?

    Larry

    Leonard P Sanders wrote:

        I have a 66 chevelle SS I am doing same thing. It started
        making squeaking noises.To make long story short,bearing in
        turn signal
        switch you can get (make sure you get right one there is
        two)and a lower bearing on the outside of firewall close to
        steering box above rag joint
        The lower bearing is hard to find.I got a new version from NPD
        (National Parts Depot) in Florida thats were i'm at.Thay sent
        me a bushing instead of a bearing.So i call them back,thay
        were very helpful about the bushing.Thay check with there " GM
        " tech and said that is what you get now. A better piece
        instead of the bearing.So thats what I'm doinig this weekend.

         On Fri 12/03/10  9:15 AM , Dan Solomon dansolo...@msn.com
        <mailto:dansolo...@msn.com> sent:
            There are bushings/bearings inside the column but the
            problem is
            going to be finding the components. Classic Muscle shows a few
            components still available but most say "call" or
            discontinued. Guess
            its possible that once you have the unit apart, you could
            match the
            components to an off the shelf item. Good luck!
            Dan
            "It is a mistake to allow any mechanical object to realize
            you are in
            a hurry."
            http://www.freewebs.com/chevelles1970/ [1]
                Date: Thu, 11 Mar 2010 17:20:51 -0800
                From: larrydwilli...@hughes.net
                <mailto:larrydwilli...@hughes.net>
                To: chevelle-list@chevelles.net
                <mailto:chevelle-list@chevelles.net>
                Subject: [Chevelle-list] Steering Column Rebuild?

                Is there any way to rebuild a 65 chevelle steering
                column? There
must
                be bushings inside that wear. My column moves
                laterally way too
much.
                Larry
            Links:
            ------
            [1] http://www.freewebs.com/chevelles1970/







Reply via email to