Well, When I want names, I do go to 21, not 22. Hit menu again, that allows for adjustment from freq, channel, name. I then select which of the three I want, then hit menu again to confirm, done. If you’ve installed names for all your frequencies, that process should do it for you.
Second, I don’t know if you are aware of this tid-bit of info or not but, if you do the process I just outlined and, you actually get names, there’s a simple way to also provide the frequency for that name, on the screen too. First, make sure your up arrow is on the top row. Then, select menu & 21 “names”. Then press menu again to confirm. Done. Now, push your “A-B” button. Now the arrow is on the bottom row. If you look to the right of the upper row, you’ll see what channel number you have selected while you selected “names”. Your arrow is presently on the bottom so, press the VFO button to select “channel mode”. Now, using the key board, press in the three numbers that you see to the right of the name you selected. When that comes up, you’ll see what’s selected, either the channel or the frequency for the numbers to match the ones above. Now you have the name, and the frequency of one particular channel, on the screen at the same time. Scott Sent from Windows Mail From: D.J.J. Ring, Jr.<mailto:[email protected]> Sent: Sunday, March 31, 2019 9:47 PM To: [email protected]<mailto:[email protected]> Cc: Jardy Dawson<mailto:[email protected]> It sounds like you have done your work with CHIRP fine. Consult your owner's manual and find the section about displaying either 1)channel number, 2) frequency, or 3) channel name. If you download from radio to CHIRP and see the names, they are there. Just find the owner's manual. It will tell you, 73 David N1EA On Sun, Mar 31, 2019, 23:28 James Corbin <[email protected]<mailto:[email protected]>> wrote: I do. When I clone to my computer all of the names are shown. For some reason when I import back to the radio, only the frequency shows. No name. Not sure what step I am missing. On Sun, Mar 31, 2019 at 20:25 Jardy via chirp_users <[email protected]<mailto:[email protected]>> wrote: Do you have names entered for those channels? Jardy Dawson WA7JRD Message sent through sub space hailing frequencies using the Universal Translator. On Mar 31, 2019, at 20:17, James Corbin <[email protected]<mailto:[email protected]>> wrote: How do I switch my Baofeng PC03 from frequency to name? When I go to 21 and 22 for the name, it still only shows frequencies. -- James Corbin _______________________________________________ chirp_users mailing list [email protected]<mailto:[email protected]> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Jardy at [email protected]<mailto:[email protected]> To unsubscribe, send an email to [email protected]<mailto:[email protected]> _______________________________________________ chirp_users mailing list [email protected]<mailto:[email protected]> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to James at [email protected]<mailto:[email protected]> To unsubscribe, send an email to [email protected]<mailto:[email protected]> -- James Corbin _______________________________________________ chirp_users mailing list [email protected]<mailto:[email protected]> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at [email protected]<mailto:[email protected]> To unsubscribe, send an email to [email protected]<mailto:[email protected]>
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
