Thank you On Sun, Mar 31, 2019 at 22:02 Scott Raines <[email protected]> wrote:
> Well, > When I want names, I do go to 21, not 22. Hit menu again, that allows for > adjustment from freq, channel, name. I then select which of the three I > want, then hit menu again to confirm, done. If you’ve installed names for > all your frequencies, that process should do it for you. > > Second, I don’t know if you are aware of this tid-bit of info or not but, > if you do the process I just outlined and, you actually get names, there’s > a simple way to also provide the frequency for that name, on the screen > too. > > First, make sure your up arrow is on the top row. Then, select menu & > 21 “names”. Then press menu again to confirm. Done. > > Now, push your “A-B” button. Now the arrow is on the bottom row. If you > look to the right of the upper row, you’ll see what channel number you > have selected while you selected “names”. > > Your arrow is presently on the bottom so, press the VFO button to > select “channel mode”. Now, using the key board, press in the three numbers > that you see to the right of the name you selected. When that comes up, > you’ll see what’s selected, either the channel or the frequency for the > numbers to match the ones above. Now you have the name, and the frequency > of one particular channel, on the screen at the same time. > Scott > > Sent from Windows Mail > > *From:* D.J.J. Ring, Jr. <[email protected]> > *Sent:* Sunday, March 31, 2019 9:47 PM > *To:* [email protected] > *Cc:* Jardy Dawson <[email protected]> > > It sounds like you have done your work with CHIRP fine. > > Consult your owner's manual and find the section about displaying either > 1)channel number, 2) frequency, or 3) channel name. > > If you download from radio to CHIRP and see the names, they are there. > > Just find the owner's manual. It will tell you, > > 73 > > David > N1EA > > On Sun, Mar 31, 2019, 23:28 James Corbin <[email protected]> wrote: > >> I do. When I clone to my computer all of the names are shown. For some >> reason when I import back to the radio, only the frequency shows. No name. >> Not sure what step I am missing. >> >> On Sun, Mar 31, 2019 at 20:25 Jardy via chirp_users < >> [email protected]> wrote: >> >>> Do you have names entered for those channels? >>> >>> Jardy Dawson WA7JRD >>> Message sent through sub space hailing frequencies using the Universal >>> Translator. >>> >>> >>> On Mar 31, 2019, at 20:17, James Corbin <[email protected]> wrote: >>> >>> How do I switch my Baofeng PC03 from frequency to name? When I go to 21 >>> and 22 for the name, it still only shows frequencies. >>> -- >>> James Corbin >>> >>> _______________________________________________ >>> chirp_users mailing list >>> [email protected] >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Jardy at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >>> >>> _______________________________________________ >>> chirp_users mailing list >>> [email protected] >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to James at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >> >> -- >> James Corbin >> _______________________________________________ >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to D.J.J. Ring, Jr. at [email protected] >> To unsubscribe, send an email to >> [email protected] > > _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to James at [email protected] > To unsubscribe, send an email to > [email protected] -- James Corbin
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
