All the way at the bottom of the list. It worked! Thank you so much.
On Tue, Mar 17, 2020, 17:43 Roger Hill <[email protected]> wrote: > In the list of ports look for something like ttyUSB0...and use that one. > Roger > G3YTN > > Get BlueMail for Android <http://www.bluemail.me/r?b=15824> > On 17 Mar 2020, at 16:39, Joel Leland <[email protected]> wrote: >> >> Hello, >> >> I have 2 UV-5R's, Baofeng, which I am attempting to program with a linux, >> Zorinos, and a Retevis cable, which I bought with the radios. I have >> programmed these radios before using a windows laptop. Now I am unable to >> get the radio to communicate with CHIRP. It goes into clone mode and then I >> get a "Radio did not respond" error message. This is using /dev/ttyS4, >> which is the first one I got a response from. >> I am very much the n00b to linux and CHIRP and could use some clear >> directions please. >> >> Thank you, >> -- >> Joel F. Leland >> >> ------------------------------ >> >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Roger at [email protected] >> To unsubscribe, send an email to >> [email protected] >> >> _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to Joel at [email protected] > To unsubscribe, send an email to > [email protected]
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
