Try entering a different USB port... It’s weird.... I only have 3USB ports on my laplop but when I entered port 6 it worked.
On Tue, Mar 17, 2020 at 5:53 PM Roger Hill <[email protected]> wrote: > Great! > > Roger > > Get BlueMail for Android <http://www.bluemail.me/r?b=15824> > On 17 Mar 2020, at 16:52, Joel Leland <[email protected]> wrote: >> >> All the way at the bottom of the list. It worked! >> >> Thank you so much. >> >> On Tue, Mar 17, 2020, 17:43 Roger Hill < [email protected]> wrote: >> >>> In the list of ports look for something like ttyUSB0...and use that one. >>> Roger >>> G3YTN >>> >>> Get BlueMail for Android <http://www.bluemail.me/r?b=15824> >>> On 17 Mar 2020, at 16:39, Joel Leland < [email protected]> wrote: >>>> >>>> Hello, >>>> >>>> I have 2 UV-5R's, Baofeng, which I am attempting to program with a >>>> linux, Zorinos, and a Retevis cable, which I bought with the radios. I have >>>> programmed these radios before using a windows laptop. Now I am unable to >>>> get the radio to communicate with CHIRP. It goes into clone mode and then I >>>> get a "Radio did not respond" error message. This is using /dev/ttyS4, >>>> which is the first one I got a response from. >>>> I am very much the n00b to linux and CHIRP and could use some clear >>>> directions please. >>>> >>>> Thank you, >>>> -- >>>> Joel F. Leland >>>> >>>> ------------------------------ >>>> >>>> chirp_users mailing list >>>> [email protected] >>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>> This message was sent to Roger at [email protected] >>>> To unsubscribe, send an email to >>>> [email protected] >>>> >>>> _______________________________________________ >>> chirp_users mailing list >>> [email protected] >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Joel at [email protected] >>> To unsubscribe, send an email to >>> [email protected] >> >> ------------------------------ >> >> chirp_users mailing list >> [email protected] >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Roger at [email protected] >> To unsubscribe, send an email to >> [email protected] >> >> _______________________________________________ > chirp_users mailing list > [email protected] > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > This message was sent to JOHN at [email protected] > To unsubscribe, send an email to > [email protected] -- John Dodd Chesapeake Bay
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
