Follow the instructions to hold the mon key and press the PTT 3 times. Unit goes into Clone mode, then get a CERR
Any suggestions? Richard K. Parrish, NREMT-P, PC Course Administrator, Woodstock FD, Com 5 35 Park Drive Woodstock, NY 12498 845-679-6504 [email protected] From: [email protected] [mailto:[email protected]] On Behalf Of Richard Shaw Sent: Friday, May 01, 2020 10:19 PM To: Discussion of CHIRP Subject: Re: [chirp_users] chirp flatpak (In need of a few brave souls) On Fri, May 1, 2020 at 9:09 PM <[email protected]> wrote: Richard, I did a live boot with Ubuntu 20.04, apt installed flatpak, added the runtime and installed your flatpak file. Success! I had Chirp running on Ubuntu 20.04 in under 10 minutes! And I was able to download and upload to several of the older Baofeng 888 radios and a Radioddity GA-2S (same driver in chirp). Good deal! Some notes on your current flatpak: - Chirp needs network access for the online repeater database and to check for updates Added, for the next version. - Chirp complains (when launched from the console) that 2 drivers need python-future package Ok, I'll add that with pip. I did some more modifications to my flatpak file and here's what I found: - pygtk fails to compile with gnome Sdk version 3.36 but compiles on 3.26. gnome Sdk 3.30 is unsupported for some reason. - I'll look into how to get things working on a newer version I'm using 3.28 as the current target. I'm not sure I really need to be using the gnome sdk over the regular freedesktop sdk but I inherited that with the json file. - Nolan's repo has a lot of stuff mine is missing. - Like a desktop shortcut Mine should show a desktop shortcut. It worked with a local repo install. Thanks, Richard
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
