Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location:
http://trac.chirp.danplanet.com/chirp_daily/daily-20201120 A list of the changes included in this build (since the last daily) follows: Changes for Build #636 [Jim Unroe <[email protected]>] [TH-UV88] New Model: TYT TH-UV88 (replacement for previous patch) This patch adds support for the TYT TH-UV88 Initial radio protocol decode, channels and memory layout by James Berry <[email protected]>, Summer 2020 Related to #7817 [Jim Unroe <[email protected]>] [H777] Add Alias for Retevis H777 This patch add an alias for the Retevis H777 #8451 [Joe Milbourn <[email protected]>] [AnyTone 778UV] Add support for Yedro YC-M04VUS, an AnyTone 778UV alias. closes #8005. Thanks to Fernando Sclavo for making it work, I just copied and pasted. [Jim Unroe <[email protected]>] [TH-UVF1] Add TYT TH-UVF1 Valid Tuning Steps This patch adds rf.valid_tuning_steps Fixes #8031 [Joe Milbourn <[email protected]>] [AnyTone 778UV] Fix DTCS support, closes #8327 [Jim Unroe <[email protected]>] [UV-5X3] Add Out-of-Range Limit Checking for Band Limits This patch adds limit checking for the BTech UV-5X3 band limits. related to #8393 [Jim Unroe <[email protected]>] [AT-778UV] Fix Mode:02 VHF Band Limit This patch corrects a typo that affects the Mode:02 VHF lower band limit. Related to issue #8391 [Jim Unroe <[email protected]>] [UV-5R] Incorrect Tone Values for ANI/PTT-ID This patch addresses the changes to the "dtmfchars" brought about by the HN5RV01 firmware. While making these changes it was also discovered that the ANI code for these radios is limited to only numeric DTMF characters. This patch also makes this correction. Fixes #8321
_______________________________________________ chirp_users mailing list [email protected] http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to [email protected] at [email protected] To unsubscribe, send an email to [email protected]
