I downloaded this and Windows 10 will not allow this to be installed on my
computer.

On Fri, Nov 20, 2020, 2:12 AM Build System <[email protected]> wrote:

> Greetings,
>
> A new daily build of CHIRP is available.  This includes changes made
> directly to the tree yesterday, and may include additional features,
> bug fixes, and/or bugs.  If you are interested in trying it, grab it
> from the following location:
>
>   http://trac.chirp.danplanet.com/chirp_daily/daily-20201120
>
>
> A list of the changes included in this build (since the last daily)
> follows:
>
> Changes for Build #636
> [Jim Unroe <[email protected]>] [TH-UV88] New Model: TYT TH-UV88
> (replacement for previous patch)
>
> This patch adds support for the TYT TH-UV88
>
> Initial radio protocol decode, channels and memory layout
> by James Berry <[email protected]>, Summer 2020
>
> Related to #7817
>
> [Jim Unroe <[email protected]>] [H777] Add Alias for Retevis H777
>
> This patch add an alias for the Retevis H777
>
> #8451
>
> [Joe Milbourn <[email protected]>] [AnyTone 778UV] Add support for
> Yedro YC-M04VUS, an AnyTone 778UV alias. closes #8005.
>
> Thanks to Fernando Sclavo for making it work, I just copied and pasted.
>
> [Jim Unroe <[email protected]>] [TH-UVF1] Add TYT TH-UVF1 Valid Tuning
> Steps
>
> This patch adds rf.valid_tuning_steps
>
> Fixes #8031
>
> [Joe Milbourn <[email protected]>] [AnyTone 778UV] Fix DTCS support,
> closes #8327
>
> [Jim Unroe <[email protected]>] [UV-5X3] Add Out-of-Range Limit
> Checking for Band Limits
>
> This patch adds limit checking for the BTech UV-5X3 band limits.
>
> related to #8393
>
> [Jim Unroe <[email protected]>] [AT-778UV] Fix Mode:02 VHF Band Limit
>
> This patch corrects a typo that affects the Mode:02 VHF lower band limit.
>
> Related to issue #8391
>
> [Jim Unroe <[email protected]>] [UV-5R] Incorrect Tone Values for
> ANI/PTT-ID
>
> This patch addresses the changes to the "dtmfchars" brought about by the
> HN5RV01 firmware.
>
> While making these changes it was also discovered that the ANI code for
> these
> radios is limited to only numeric DTMF characters. This patch also makes
> this
> correction.
>
> Fixes #8321
>
>
> _______________________________________________
> chirp_users mailing list
> [email protected]
> http://intrepid.danplanet.com/mailman/listinfo/chirp_users
> This message was sent to Harold Gray at [email protected]
> To unsubscribe, send an email to
> [email protected]
_______________________________________________
chirp_users mailing list
[email protected]
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to [email protected] at [email protected]
To unsubscribe, send an email to [email protected]

Reply via email to